kbond Posted September 25, 2012 Share Posted September 25, 2012 Hi everyoneGot my gt booked into tuning developments on the 8th of october to be remapped but unsure of how much boost to run?Im still on standard internals with zisco td04 setup with screamer pipe, fse fpr, and a smaller golf front mount intercooler mounted to the side with really short piping for quicker spool and the rest.Just wanted to see what everyone else is running power wise and what boostCheers keiran Quote Link to post Share on other sites
aki-ep Posted September 25, 2012 Share Posted September 25, 2012 wouldn't run more than a bar IMO. people run more though, 1.2 and so on Quote Link to post Share on other sites
akyakapotter Posted September 25, 2012 Share Posted September 25, 2012 I run 1bar 233bhp 210 ftlb torque Quote Link to post Share on other sites
kbond Posted September 25, 2012 Author Share Posted September 25, 2012 That good at 1bar! I think id be happy with thatBeforw this i ran 1 bar on a ct9 but not sure how much bhp that was as never had it dynoed but how would this compare? Quote Link to post Share on other sites
mattyD Posted September 25, 2012 Share Posted September 25, 2012 go 1 bar mate just to be on the safe side 1 bar on a ct9 would make you about 180ish and nick made 233 at 1 bar on a td04 dude.............about 50bhp is the difference Quote Link to post Share on other sites
kbond Posted September 25, 2012 Author Share Posted September 25, 2012 1 bar sounds good then i think as will be using it every day so will need to be reliable Quote Link to post Share on other sites
Broony Posted September 25, 2012 Share Posted September 25, 2012 (edited) They know what they are doing down there so they will map the car to within its potential which is normally 1bar unless you want them to push it which others have done. Edited September 25, 2012 by Broony Quote Link to post Share on other sites
akyakapotter Posted September 25, 2012 Share Posted September 25, 2012 Yeah mine is a daily 1bar is fine Quote Link to post Share on other sites
kbond Posted September 25, 2012 Author Share Posted September 25, 2012 Cheers lads! Quote Link to post Share on other sites
Taggy Posted September 25, 2012 Share Posted September 25, 2012 (edited) Ai its 1bar all day long, or maybe you will get 12 months out of it at 1.1-1.2 bar, then eventually a ringland will go Edited September 25, 2012 by Taggy Quote Link to post Share on other sites
Driver Posted September 25, 2012 Share Posted September 25, 2012 Ai its 1bar all day long, or maybe you will get 12 months out of it at 1.1-1.2 bar, then eventually a ringland will go Or 1.6 bar for 18 month without a single engine issue (the car/engine still lives on 3 years later)Depends on your power goals. 1.0 on a decent map will produce between 210-230. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.