ryan lang Posted December 10, 2012 Share Posted December 10, 2012 no, looking at that there are 4 stud holes underneath and 2 on the top. but the 4efe has the 4 on the top and 2 underneath. so i imagine the runners wont line up with the ports if you where to re-drill the flange anywayryan Link to post Share on other sites
jimmymac101 Posted December 11, 2012 Author Share Posted December 11, 2012 Ahh that's ashame would have been a bargain if it had James Link to post Share on other sites
motion Posted December 11, 2012 Share Posted December 11, 2012 310€ incl. shipping should be about 240£ Link to post Share on other sites
ryan lang Posted December 11, 2012 Share Posted December 11, 2012 i paid around 160 for my manifold and 70 delivery, also had to pay import duty of £20 so thats cheap Link to post Share on other sites
jimmymac101 Posted December 11, 2012 Author Share Posted December 11, 2012 Your a legend motion thanks That's not to bad of a price actually, would that be straight fit or would it need work to fit ? Hopefully Santa will bring lots of money ;) James Link to post Share on other sites
ryan lang Posted December 11, 2012 Share Posted December 11, 2012 will bolt straight on, but then you'll need a custom mid pipe and rear section made to fit from the pipe with the flexi bit back, because the standard zorst would be pointless using with this, and no aftermarket ones that will bolt to this are available. but definitely worth it Link to post Share on other sites
jimmymac101 Posted December 11, 2012 Author Share Posted December 11, 2012 That's ok then I currently have an infinity cat back il have to go back and get a decat pipe made and match it all up James Link to post Share on other sites
ryan lang Posted December 11, 2012 Share Posted December 11, 2012 yeah you can probably use most of it, but will just need it shortened or lengthened to fit Link to post Share on other sites
Recommended Posts