Foggy Posted January 14, 2013 Share Posted January 14, 2013 (edited) Item For Sale: Fully Mappable Hks f con is with cruise ep91 loom very rare itemItem Condition & Description: Mappable ecu, Removes speed cut, fuel cut and can be mapped for any setup. The case it see through and looks very smart.Direct plug in to a ep91 glanza. No wiring needed what so ever. Mapped for 1.2 bar on a ct9Price: 450 poundsPictures: Payment & Shipping Details: This item is in Ireland.Paypal + fees. Postage and insurance at buyers cost The loom alone is over 500 from japan just on its own!http://www.rhdjapan.com/cruise-f-con-v-pro-harness-ep82-ep91-starlet-50326?nflag=1&___store=fr&___from_store=default Edited May 10, 2013 by Foggy Quote Link to post Share on other sites
Simon Posted January 14, 2013 Share Posted January 14, 2013 Does this use an auto TPS and different map sensor? Quote Link to post Share on other sites
Foggy Posted January 14, 2013 Author Share Posted January 14, 2013 I cant see any aftermarket tps or map sensor. Quote Link to post Share on other sites
micky boy Posted January 14, 2013 Share Posted January 14, 2013 (edited) You dont see many of these about these days! Good price too Edited January 14, 2013 by micky boy Quote Link to post Share on other sites
Simon Posted January 14, 2013 Share Posted January 14, 2013 It's not a cruise harness then, the cruise harness was for the v-pro not the IS and used a differnt map sensor plugged directly into the cruise loom and also needed the auto TPS.This is still a good buy for someone at that price but will not have all the features of a v-pro. Quote Link to post Share on other sites
Simon Posted January 14, 2013 Share Posted January 14, 2013 Good info on the HKS ecu's can be found here:http://1jzmerc.com/hks-faq/hardware/f-con-iS Quote Link to post Share on other sites
Foggy Posted January 14, 2013 Author Share Posted January 14, 2013 Cheers for the info. Must pull out the ecu and have a proper look tomorrow. There is a cruise tag in the glovebox. Its a proper loom anyway. Quote Link to post Share on other sites
A L 3 X Posted January 14, 2013 Share Posted January 14, 2013 How does this compare to an emanage blue? Quote Link to post Share on other sites
Foggy Posted January 14, 2013 Author Share Posted January 14, 2013 How does this compare to an emanage blue? From what i read off the net they get great reviews. I seen one to make 190bhp with a ct9 at a bar of boost. Tbh i dont think much of the emb. Quote Link to post Share on other sites
A L 3 X Posted January 14, 2013 Share Posted January 14, 2013 Obviously it's not like a plug and play so I couldn't plug it in and whack my ct9 to 1.2 bar, not ideally anyway....but would it be possible to map to a td04? And do you know of anywhere who does it?Slightly tempted just for the fact you can output the readings to a monitor lolOut of interest, why do you not rate emb? Quote Link to post Share on other sites
Foggy Posted January 14, 2013 Author Share Posted January 14, 2013 Obviously it's not like a plug and play so I couldn't plug it in and whack my ct9 to 1.2 bar, not ideally anyway....but would it be possible to map to a td04? And do you know of anywhere who does it?Slightly tempted just for the fact you can output the readings to a monitor lolOut of interest, why do you not rate emb?Its a mappable piggyback ecu. Yes it would be possible to remap for your set up unlike the likes of a jam or simular.I know trackday performance in ireland can do it and im sure there is more than a few tuners in the uk than can map it. Quote Link to post Share on other sites
Foggy Posted January 22, 2013 Author Share Posted January 22, 2013 Bump Quote Link to post Share on other sites
Foggy Posted January 24, 2013 Author Share Posted January 24, 2013 Bump open to offers Quote Link to post Share on other sites
Foggy Posted January 27, 2013 Author Share Posted January 27, 2013 Bump Quote Link to post Share on other sites
Foggy Posted February 10, 2013 Author Share Posted February 10, 2013 400 pounds takes it. Very cheap ecu. Quote Link to post Share on other sites
Foggy Posted February 18, 2013 Author Share Posted February 18, 2013 Cruise Front bumper added.Closer inspection there is 2 unused plugs so a map sensor can be directly plugged in. It is a cruise loom as i stated.More pics up. Quote Link to post Share on other sites
little dave Posted February 18, 2013 Share Posted February 18, 2013 That's a lovely bumper she I just done a varis bumper Quote Link to post Share on other sites
Foggy Posted February 20, 2013 Author Share Posted February 20, 2013 It's a very love it or hate it bumper. Looks epic with a nice fmic behind it. Quote Link to post Share on other sites
Foggy Posted May 10, 2013 Author Share Posted May 10, 2013 Bumper sold. Ecu is now for sale for 350 pounds + postage.Very cheap ecu for someone!! Quote Link to post Share on other sites
Foggy Posted May 10, 2013 Author Share Posted May 10, 2013 Replied Quote Link to post Share on other sites
Foggy Posted May 10, 2013 Author Share Posted May 10, 2013 sold please lock Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.