Safe or not? Please help!

[Bryan-4E-FTE]

Right i just got my boost gauge refitted.
Before i had a boost gauge i put a hks actuator in the car and it dosent hit fuelcut but i see on my boost gauge 0.8Bar.
I run a CT9 turbo , a stock exhaust manifold and a stock cat.
Other mods are a Apexi N1 full catback and a HKS mushroomfilter.
Sould i turn my boost down to about 0.6 or is it fine at 0.8?

Any help would be great!

[Matt1878]

If its boosting safely at .8 bar and you are happy that it is not creeping then that's fine

.85 bar is where fuel cut hits.

My glanza runs at .8 bar and pulls great

[Bryan-4E-FTE]

Yeah but you got a different mani and downpipe?

Mine is compleet stock so need to be sure.

Gonna make a few laps on the nurburgring next month so dont want to blow my engine.

[pick1]

It should be fine dude to run at .8 as it just below fuel cut

[wssoR]

if your only running a stock exhaust manifold then id turn it down mate

[Matt1878]

It was running .8 bar on the standard mani and downpipe too... Never had a problem for well over a year.

If you don't feel safe then you should turn it down

[A L 3 X]

I would port your mani or turn it down, upto you though

[Bryan-4E-FTE]

thnx for the advice all!!
Gonna turn it down abit next week!