Sandham Posted June 15, 2013 Share Posted June 15, 2013 Hi ive come to fit my race tech braided oil line, and when i removed my old one the banjo bolt only had 1 washer, the bit it screws into thats bolted to the block is threaded about 3/4 the way down so i can only assume that the washer was removed so the banjo bolt could bite into the decent threads.New to starlets but have mechanical knowledge, am just wondering what i need to replace and where to get it from?Thanks Quote Link to post Share on other sites
WallaceGlanza Posted June 16, 2013 Share Posted June 16, 2013 (edited) Ideally you want a new washer on both sides of the banjo fitting the other one probably just got dropped! They're just 16mm (I think) copper washers, easy to get. Edited June 16, 2013 by WallaceGlanza Quote Link to post Share on other sites
mikey4410 Posted June 16, 2013 Share Posted June 16, 2013 yeap u do 100% need to copper washers either side mate without doubt,nedd them for a proper seal. Quote Link to post Share on other sites
Sandham Posted June 16, 2013 Author Share Posted June 16, 2013 I have new washers, the previous owner must of fitted it without both washers because the inside of what i belive to be the oil filter housing? has threaded part way in. The banjo bolt will only catch the threads with 1 washer removed..I was wondering where i can get a new oil filter housing from? Quote Link to post Share on other sites
mikey4410 Posted June 16, 2013 Share Posted June 16, 2013 Hmm,thats not good.u will have to post an add on wanted section to get one....thats my advice Quote Link to post Share on other sites
Sandham Posted June 16, 2013 Author Share Posted June 16, 2013 Ok thanks Quote Link to post Share on other sites
TurboTobz Posted June 16, 2013 Share Posted June 16, 2013 I think I have one in my garage Quote Link to post Share on other sites
Sandham Posted June 16, 2013 Author Share Posted June 16, 2013 If so how much do you want for it? Is it the bit the banjo bolt fastens in to? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.