mark1991 Posted December 22, 2013 Share Posted December 22, 2013 (edited) I have fitted 2 gauges over this weekend, an pressure gauge and a water temp gauge. The oil pressure is working fine! but the water temp is getting power but flashing on and off... it is a timed flash so its not the power harness. it was working fine last night! but i have checked all the connections and all seam fine. this the gauge here \/\/\/ http://www.ebay.co.uk/itm/DEPO-RACING-60-MM-SMOKED-2-COLOR-RED-AND-WHITE-DUAL-VIEW-WATER-TEMPERATURE-GAUGE-/290887361928?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43ba3ce588 Cheers Mark Edited December 22, 2013 by mark1991 Quote Link to post Share on other sites
JayJ Posted December 23, 2013 Share Posted December 23, 2013 i think Depos will flash if the sensors aren't connected. Quote Link to post Share on other sites
mark1991 Posted December 23, 2013 Author Share Posted December 23, 2013 Thats exactly what I thought! But it is connected and all wires are correct... I have checked them numerous times! If I join the 2 signal wires and the gauge stops flashing I much have a fault sensor!? Quote Link to post Share on other sites
JayJ Posted December 23, 2013 Share Posted December 23, 2013 If you got a multimeter, check the sensor resistance and give some heat for the sensor and you should see the resistance change. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.