Wardy Posted December 22, 2013 Share Posted December 22, 2013 I have a Tuning Developments TD04 Hybrid kit and i need to know a few things that im getting stuck with. 1. Where does the brace fit/attach to and what bolts do you use 2. What Banjo bolt do i need to fit the braided feed? 3. I have a Tial MVS Wastegate and am unsure of where the vac fittings need to go on the wastegate and which ones to block off? Any help would be appreciated Thanks Wardy Quote Link to post Share on other sites
daniel_g Posted December 22, 2013 Share Posted December 22, 2013 Decat braces normally bolt to the gearbox where it meets the block, theres two holes, one above another. The standard banjo bolt off the oil filter housing and the standard one off the TD04For 3, are you running an EBC or not ? Quote Link to post Share on other sites
Wardy Posted December 22, 2013 Author Share Posted December 22, 2013 Cheers dude, I am running a EBC (greddy E01) Ant the banjo bolt that goes into the TD04 Cheers Quote Link to post Share on other sites
daniel_g Posted December 22, 2013 Share Posted December 22, 2013 You can get the banjo bolts off any trader on here, i got them recently with lines from Zisco. There should be a diagram for the EWG & EBC vac lines floating around the tech section somewhere. Quote Link to post Share on other sites
Wardy Posted December 22, 2013 Author Share Posted December 22, 2013 Ive had a quick search but not really found anything so been scanning people build threads but alot of people arnt running the MVS wastegate Cheers for your help dude Quote Link to post Share on other sites
daniel_g Posted December 22, 2013 Share Posted December 22, 2013 Ahh how does the MVS differ ? Maybe Mike@TD could tell you how it plumbs up ? Quote Link to post Share on other sites
Wardy Posted December 22, 2013 Author Share Posted December 22, 2013 on other wastegates i have seen there is only 2 fittings which are for the vac lines but on the MVS there are coolant lines which need to be blocked off and 3 air ports Quote Link to post Share on other sites
Mad Mike EP82 Posted December 22, 2013 Share Posted December 22, 2013 on other wastegates i have seen there is only 2 fittings which are for the vac lines but on the MVS there are coolant lines which need to be blocked off and 3 air ports Two ports are for water cooled don't need to block them off as for the vac ports there are two next to each other on the side use them and block the others I can post a pic of mine wen I get home if ya want Quote Link to post Share on other sites
Phil Posted December 23, 2013 Share Posted December 23, 2013 (edited) Phil Edited December 23, 2013 by Philm Quote Link to post Share on other sites
Mad Mike EP82 Posted December 23, 2013 Share Posted December 23, 2013 Hope this helps Quote Link to post Share on other sites
Mike@TD.co.uk Posted December 23, 2013 Share Posted December 23, 2013 Wardy, if you're struggling give me a quick phone call and I can talk you through it bud. Banjo bolt should be with the turbo kit Cheers Mike Jones Tuning Developments Ltd Quote Link to post Share on other sites
Wardy Posted December 24, 2013 Author Share Posted December 24, 2013 That helps alot cheers guys, just needed to see which ports to use on my wastegate. Ok cheers mike, i havent got a banjo bolt and i didnt have a oil return pipe that mounts at the bottom of the TD04 But i have ordered them both now cheers bud! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.