Purps-g Posted January 6, 2014 Share Posted January 6, 2014 I'm looking to buy new wheels for my glanz I have coilovers but not to keen on rolling arches! Was looking at rota grids or xxr 530/527 but what size width and offset? Cheers guys and gals Quote Link to post Share on other sites
AdamB Posted January 6, 2014 Share Posted January 6, 2014 Xxr wheels you will struggle because they come in wide sizes and low offsets. Grids will be alright providing you don't go low on the offset. 6.5J width and anything around the 35-42 offset will fit fine. Quote Link to post Share on other sites
Purps-g Posted January 6, 2014 Author Share Posted January 6, 2014 I have 6.5j grids on but they ain't wide enough! Don't know what to do! Quote Link to post Share on other sites
Azz Posted January 6, 2014 Share Posted January 6, 2014 You can get xxr in a wide range of sizes.If you done want any arch with I would go anything wider than 7" or lower than et30 Quote Link to post Share on other sites
Purps-g Posted January 6, 2014 Author Share Posted January 6, 2014 15x7 et20 grids? With a 45 profile and a slight stretch? Cheers Quote Link to post Share on other sites
Azz Posted January 6, 2014 Share Posted January 6, 2014 15x7 et20 grids? With a 45 profile and a slight stretch? CheersWouldn't be far off I shouldn't think Quote Link to post Share on other sites
fordie_glanzaV Posted January 6, 2014 Share Posted January 6, 2014 Im on 15x7 grid v et20 195/50/15 on the rears. I had to roll my arches.. was catching like hell. No probs now arches done...Dunno what fronts are like as only on 15x7 et40 Quote Link to post Share on other sites
Ollieh17 Posted January 6, 2014 Share Posted January 6, 2014 i have 16x8j grids et 10, no major arch work needed just folding the lip over in the rear. No problem on the front with 40mm lowering springs Quote Link to post Share on other sites
fordie_glanzaV Posted January 6, 2014 Share Posted January 6, 2014 i have 16x8j grids et 10, no major arch work needed just folding the lip over in the rear. No problem on the front with 40mm lowering springsSame as i done just rolled the lip up.. job done.. Quote Link to post Share on other sites
Purps-g Posted January 6, 2014 Author Share Posted January 6, 2014 See how the wages are this week haha! Cheers guys Quote Link to post Share on other sites
Glanza-Ben Posted January 12, 2014 Share Posted January 12, 2014 I use to run 7.5j et30 and could not of sat any better in the arch Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.