jamesglanza Posted February 9, 2014 Share Posted February 9, 2014 (edited) Item For Sale: Tein control master flex type coilovers.Item Condition & Description: Good clean working condition, No bangs, knock's, squeaking or leaking. everything is free'd and greased up ready to fit. Adjustable ride height front camber adjustment, pillow ball top mounts and 16 point dampening adjustment. These where on my Glanza when it was imported from Japan and the car has only been in my ownership since. They looked pretty much brand new when i got the car not a scratch on them, But have covered around 20 - 25,000 miles (3 years) on uk roads now so do not look so shinny.The car was not my everyday drive and have now purchased new suspension, would Like to keep them but need the cash so these are not needed any more.Price: SOLD! (Around £1200 new)Pictures: http://i1108.photobucket.com/albums/h417/jimglanza/for%20sale%20ukso/jamespics159_zps39c48382.jpg?t=1391956560 http://i1108.photobucket.com/albums/h417/jimglanza/for%20sale%20ukso/jamespics160_zpsa8432e74.jpg?t=1391956570Payment & Shipping Details: Paypal, Around £20.00-£25.00 Depending on Area and service or your welcome to arrange your own courier at your cost and responsibility. Please note i live on the Isle of Wight, you can pick up if you wish! Item For Sale: Poly bushed engine mount. Item Condition & Description: Poly bushed rear engine/gearbox mount. Great condition has covered around 20,000 miles max. Saves you all the hard work of removing the old bush, just bolt on and go. Removed as using full TRD engine mount set now. Price: OFFERS? (Bush alone is around £35 new) Pictures: http://i1108.photobucket.com/albums/h417/jimglanza/for%20sale%20ukso/jamespics161_zpsa0202822.jpg?t=1391956618 Payment & Shipping Details: Paypal, Around £7.50-£10.00 Depending on Area and service or your welcome to arrange your own courier at your cost and responsibility. Item For Sale: Sard cooling block/sandwich plate. Item Condition & Description: Good, Allows you to use oil temp and pressure sensors and brings down the oil temps by a few degrees. Used for a very short while (not by me) not using this as i have a full filter relocation and oil cooler kit with pick ups for oil temp and pressure sensors so its not needed now. Price: SOLD (Around £80.00 new) Pictures: http://i1108.photobucket.com/albums/h417/jimglanza/for%20sale%20ukso/jamespics162_zpscf0173f9.jpg?t=1391956608 Payment & Shipping Details: Paypal, Around £3.00-£5.00 Depending on Area and service or your welcome to arrange your own courier at your cost and responsibility. Edited February 14, 2014 by jamesglanza Quote Link to post Share on other sites
Pacman GT Posted February 10, 2014 Share Posted February 10, 2014 Hi Sent you a pm Quote Link to post Share on other sites
jamesglanza Posted February 10, 2014 Author Share Posted February 10, 2014 Replied. Quote Link to post Share on other sites
Chops Posted February 10, 2014 Share Posted February 10, 2014 id like the sarnie plate, pmd. Quote Link to post Share on other sites
jamesglanza Posted February 10, 2014 Author Share Posted February 10, 2014 Replied, Also the Sard sandwich plate fits neatly on the oil filter housing, does'nt need chopping down to fit or leak like the cheap ones. Quote Link to post Share on other sites
brendonware Posted February 12, 2014 Share Posted February 12, 2014 I may have to take those coilovers off your hands Brendon Quote Link to post Share on other sites
shaeeb Posted February 14, 2014 Share Posted February 14, 2014 Hi James's I've sent pm,Cheers.. Quote Link to post Share on other sites
jamesglanza Posted February 14, 2014 Author Share Posted February 14, 2014 Coilovers - SOLDCooling block - SOLDOffers on the rear gearbox mount?Thanks. Quote Link to post Share on other sites
jamesglanza Posted February 16, 2014 Author Share Posted February 16, 2014 Ttt Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.