kevmcc90 Posted March 18, 2014 Share Posted March 18, 2014 As title says, I've drained all from radiator, but will there be more in system? If so how do I go about draining that? Quote Link to post Share on other sites
daniel_g Posted March 18, 2014 Share Posted March 18, 2014 If you pull one of the pipes off the heater matrix and also one off the thermostat housing and fire a hose pipe in it you can force the old coolant out and flush it with clean water. Then start putting coolant in when all the old shit it out.The pipes go through the bulkhead to the heater matrix, near the throttle body area. Quote Link to post Share on other sites
kevmcc90 Posted March 18, 2014 Author Share Posted March 18, 2014 Cheers mate. Thought that would be solution but just wanted to check Quote Link to post Share on other sites
turbo Grant Posted March 18, 2014 Share Posted March 18, 2014 There is also a coolant drain bung on the engine block at the front left hand side about half way up Quote Link to post Share on other sites
kevmcc90 Posted March 18, 2014 Author Share Posted March 18, 2014 Is it like underneath manifold? Quote Link to post Share on other sites
turbo Grant Posted March 19, 2014 Share Posted March 19, 2014 It's behind the turbo kit on the engine block Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.