kaiep91 Posted April 7, 2014 Share Posted April 7, 2014 Basically, I've got an Ewg type setup with a tial waste gate with a .6 bar spring in it.. I just want to get the car running til after summer when I can afford abit more, can I run the setup without a boost controller, just wastegate pressure? And how would I do this? Also will I need an adjustable fpr for this as it's running near standard boost? Quote Link to post Share on other sites
_shaun_ Posted April 7, 2014 Share Posted April 7, 2014 You can run it with out a boost controller or fpr just run a vac line from turbo to bottom of wastegate Quote Link to post Share on other sites
kaiep91 Posted April 7, 2014 Author Share Posted April 7, 2014 you sure mate and I should be ok with this setup? I have a wideband kit anyway Quote Link to post Share on other sites
_shaun_ Posted April 7, 2014 Share Posted April 7, 2014 Aye you should be fine plenty of people do it just keep an eye on the wideband its handy you have one Quote Link to post Share on other sites
kaiep91 Posted April 7, 2014 Author Share Posted April 7, 2014 Ok mate thank you I shouldn't experience any boost creep etc? Quote Link to post Share on other sites
_shaun_ Posted April 7, 2014 Share Posted April 7, 2014 Not on an external set up no Quote Link to post Share on other sites
mikey4410 Posted April 7, 2014 Share Posted April 7, 2014 as above. and also external wastegates hold boost exceptionally well and are far superior to internel wastes Quote Link to post Share on other sites
kaiep91 Posted April 8, 2014 Author Share Posted April 8, 2014 Wicked thanks Fueling should be okay then right? Quote Link to post Share on other sites
Zeldoz Posted April 8, 2014 Share Posted April 8, 2014 2.5/2.6 bar id get a FPR i did Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.