kevmcc90 Posted April 25, 2014 Share Posted April 25, 2014 Fitted my new radiator this morning and everything went well. Bled it to get rid of air etc. Car runs fine but temp gauge is now not doing anything at all. Anyone able to shed some light on what could be up? Quote Link to post Share on other sites
kevmcc90 Posted April 25, 2014 Author Share Posted April 25, 2014 Bump Quote Link to post Share on other sites
TimD Posted April 25, 2014 Share Posted April 25, 2014 You'll have knocked something, or disconnected a sensor and not connected it. Quote Link to post Share on other sites
kevmcc90 Posted April 25, 2014 Author Share Posted April 25, 2014 I've had a good look about to make sure i hadn't, but will have another look. Only thing I disconnected was obviously the fan Quote Link to post Share on other sites
daniel_g Posted April 25, 2014 Share Posted April 25, 2014 Check the sensors on the thermostat housing, just under the dizzy, the one for the temp gauge is on there. Canny mind which one it is but because GTs and 96 / 98 spec V are different iirc. Quote Link to post Share on other sites
davehart Posted April 25, 2014 Share Posted April 25, 2014 You might have pinched the sensor at the bottom of the radiator when putting the new one on. Check that first. Quote Link to post Share on other sites
kevmcc90 Posted April 25, 2014 Author Share Posted April 25, 2014 Cool will have a look lads Quote Link to post Share on other sites
kevmcc90 Posted April 26, 2014 Author Share Posted April 26, 2014 Yeah I checked that and of course wire had snapped off so reconnected it and letting it heat up as we speak so will go out for a spin and make sure everything is ok Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.