fiddlersport Posted May 26, 2014 Share Posted May 26, 2014 Hi I am planning to do a conversion and drop a 5efhe into the ep91 uk 4efe non (acis) 5e ecu has on the 16 plug (pin 1) switched battery power (12v) the 16 plug on the 4efe wiring these is no switched battery power (12v) on the pin 1 surely some one has ran into this has the 4efte also has the switched.........(12v) I am guessing from other talk on this it has something to do with the dizzy coil, 4efe has internal coil and 5e has external coil maybe ? or does it have something to do with the efi relay ? Quote Link to post Share on other sites
Chris Green Posted May 26, 2014 Share Posted May 26, 2014 Swap all the sensors and dizzy over and used the 4efe loom & ecu. Also will need the 4efe TB. Quote Link to post Share on other sites
fiddlersport Posted May 26, 2014 Author Share Posted May 26, 2014 Hi chris, i have the full loom and all the sensors that came off the 5e and ignitor and coil, all still attached with all vac pipes, why not use it ? the loom and pins is really identical but just the 1 pin which the 4e hasnt got i nned to make it owrk on the 5e i thinks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.