german4efte Posted June 22, 2014 Share Posted June 22, 2014 (edited) Hello,i got my 4efte with CT9 hybrid running at 1 Bar and sometimes when i drive agressive clutch is slipping slightly. CLutch is not worn, last winter i changed gearbox and checked itI uses OEM style exedy clutchkit. OEM Torque (NM) is 160nm, think the clutch can handle more but now its to much power. I like to buy Exedy stage2, BUT at the specs is written these clutch can handle Torque (Nm): 220NM. this is not very much?!?! I plan running 1,2 bar with 370cc injectors, mapped with greddy EMU and i think this will make more than 220NM hope someone can give an experience about clutches and waht these can handle. what abaout competition clutches? good stuff? problems? Edited June 22, 2014 by german4efte Quote Link to post Share on other sites
mikey4410 Posted June 22, 2014 Share Posted June 22, 2014 Just go straight with a 6 puck stage 4 paddle clutch.its over kill but will be more than man enough for anything you throw at it and will allow for future mods and upgrades. Buy once buy right, dont do what I did and buy twice because I didnt want to spend the money at first, but cost me more money and time and effort in long run Quote Link to post Share on other sites
german4efte Posted June 22, 2014 Author Share Posted June 22, 2014 yes, that was my problem....Dont want spend money twice..I want ONE clutch what can handle enough. But i dont realy believe that a Stage2 exedy can be strong enought? Quote Link to post Share on other sites
mikey4410 Posted June 22, 2014 Share Posted June 22, 2014 And also more importantly u MUST makesure clutch is skimmed and in good health as no matter how good your clutch is it wont grip the flywheel if flywheels not good Dont worry bout exedy clutches etc, just buy a 6 puck stage 4 mate Quote Link to post Share on other sites
mikey4410 Posted June 22, 2014 Share Posted June 22, 2014 http://www.ebay.co.uk/itm/ID-Workz-Competition-Stage-4-Racing-Paddle-Clutch-Toyota-Starlet-Turbo-Glanza-/131151125210?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AStarlet&hash=item1e89375ada http://www.ebay.co.uk/itm/Tuning-Developments-6Puk-Paddle-Clutch-Kit-Toyota-Starlet-GT-Turbo-EP82-4EFTE-/331211413406?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AStarlet&hash=item4d1dbd179e Quote Link to post Share on other sites
richardc9052 Posted June 22, 2014 Share Posted June 22, 2014 One of the lads is using an oem spec clutch from an SW20 MR2 3sge but you need to grind a touch off the pressure plate to stop it from hitting the box.. Its holding perfect td04 @ 1 bar with mines ecu Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.