amatthews45 Posted June 28, 2014 Share Posted June 28, 2014 Hey guys As a few know I have a broken GT I have bought a low millage non modded bottom end and plan to use my head. Now I think I know my full list but please let me know if I am missing anything Head gasket Head bolts Cambelt Water pump Oil pump Headgasket Stem seals Crank shaft seal (I think) Inlet gaskets Manifold/turbo gaskets Anything else I will need? I plan to renew these items while I am at it. Fuel filter Fuel line Turbo oil/water feed Ht leads Dizzy Coilpack Starter Alternator Anything else? Should I do pistons rings and get items skimmed while I am at it. Thanks Alex Quote Link to post Share on other sites
1990timeismoney Posted June 28, 2014 Share Posted June 28, 2014 Idrees should be able to help you out Quote Link to post Share on other sites
Sefton-EP91 Posted June 28, 2014 Share Posted June 28, 2014 Id workz or tuning developments. Both very well priced. Quote Link to post Share on other sites
amatthews45 Posted June 28, 2014 Author Share Posted June 28, 2014 Have I listed everything I need? Quote Link to post Share on other sites
Idrees Posted June 28, 2014 Share Posted June 28, 2014 Thanks gents. As above, we stock all engine built items. If you send me a PM or email I'll see what deal I can do. Quote Link to post Share on other sites
amatthews45 Posted June 28, 2014 Author Share Posted June 28, 2014 Nice one idrees well I can just buy it all now though I wish I could! So you can supply everything I need in the list except starter and alternator? Quote Link to post Share on other sites
Idrees Posted June 28, 2014 Share Posted June 28, 2014 Yes mate Quote Link to post Share on other sites
amatthews45 Posted June 29, 2014 Author Share Posted June 29, 2014 How much is total build gonna cost Is there anything else people would suggest? Quote Link to post Share on other sites
funny onion Posted June 29, 2014 Share Posted June 29, 2014 Id-workz 100% Got all my rebuild parts from Idrees too service and great prices. Arrived next day too. Quote Link to post Share on other sites
funny onion Posted June 29, 2014 Share Posted June 29, 2014 When I rebuilt an engine from a bare block I used the following. - full toyota gasket set- full acl bearing set - water pump- oil pump - piston rings - head skimmed and block checked (block didn't need decking)- bores cross hatch honed - cambelt kit- had the block/head acid dipped and washed (would recommend that to get rid of sludge and shit in the oil/water ways) - new coolant hose kit as mine was looking old and didn't want hoses splitting - new plugs/dizzyWasn't cheap!!!! And then had to take her for another remap once the fresh engine was bedded in. The things we do all for a 1.3 hahaha enjoy. Quote Link to post Share on other sites
amatthews45 Posted June 29, 2014 Author Share Posted June 29, 2014 Thanks well a few of them bits I don't need. With bottom end been split for awhile should I do the rings or not? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.