turbominicooper Posted August 9, 2014 Posted August 9, 2014 turns out there is play in the shaft.what should i do next, budget options:- source a rebuild kit and have a go myself?- get a 2nd hand ct9?- send it away to be rebuilt?whats the most cost effective way? or should i go mental and get a ct9 hybrid? i have some ct20's kicking about, should i mix 'n' match? Quote
5e colin Posted August 9, 2014 Posted August 9, 2014 fuck the ct9 in the bin and upgrade to cheap tdo4 kit then make 1 of these adaptor plates so you can bolt a turbo cat onto it and pass mot/nct :) Quote
turbominicooper Posted August 9, 2014 Author Posted August 9, 2014 fuck the ct9 in the bin and upgrade to cheap tdo4 kit then make 1 of these adaptor plates so you can bolt a turbo cat onto it and pass mot/nct :) na theres more to the conversion then this adapter plate. wanna keep it ct9 for. got a gt28r for when the time comes Quote
5e colin Posted August 9, 2014 Posted August 9, 2014 (edited) just as simple as that mate have a look just tdo4 and a mani with custom adaptor plate ofcourse you will nead a oil line to but that aint hard work now i have revealed wich manni it works with oooops :( ha ha dont work with most of them !!!!! Edited August 9, 2014 by 5e colin Quote
turbominicooper Posted August 9, 2014 Author Posted August 9, 2014 just as simple as that mate have a look just tdo4 and a mani with custom adaptor plate ofcourse you will nead a oil line to but that aint hard work now i have revealed wich manni it works with oooops :( ha ha dont work with most of them !!!! what about other bits like FPR, fuel cut, uprated pump etc? Quote
5e colin Posted August 9, 2014 Posted August 9, 2014 dont need them yet you can run like this 7psi perfect with stock ecu and feuling 1 thing you do need is fmic i am even running stock exhaust atm for nct/mot 1s you have it there then its very easy to make it go faster ha ha i did this becouse i went tru sooo many shitty ct9 smoke machines i have a smokeless vf now with no play ( really minimal ) etc etc will never go back to ct9 and i am emissions legal to Quote
turbominicooper Posted August 9, 2014 Author Posted August 9, 2014 ill have to look into it, i know its the rave with starlets. what mani is that your running? Quote
5e colin Posted August 9, 2014 Posted August 9, 2014 toyosports mild steel bla bla bla every 1 say there crap but wen you weld on a simple supporting bracket they will last just as long as the top brands ! Quote
turbominicooper Posted August 9, 2014 Author Posted August 9, 2014 toyosports mild steel bla bla bla every 1 say there crap but wen you weld on a simple supporting bracket they will last just as long as the top brands ! yeh ive got a brace bracket on my decat. sound i will look into this. thanks for the advice Quote
mikey4410 Posted August 9, 2014 Posted August 9, 2014 Tiz true.never had any issues with toyosports manis in mild steel when braced. Quote
turbominicooper Posted March 29, 2015 Author Posted March 29, 2015 dont need them yet you can run like this 7psi perfect with stock ecu and feuling 1 thing you do need is fmic i am even running stock exhaust atm for nct/mot 1s you have it there then its very easy to make it go faster ha ha got one of these in the post now colin. would this work the same for an unopened 5efhe accompanied with a 2.5" exhaust? Quote
5e colin Posted March 29, 2015 Posted March 29, 2015 same deal :) but afr need checking because its a 1.5 !!!! or fit 370cc injectors ( wideband and fpr needed ) Quote
turbominicooper Posted March 29, 2015 Author Posted March 29, 2015 what should the afr be on 1.5 with that setup? Quote
5e colin Posted March 29, 2015 Posted March 29, 2015 you want the same on boost as on a 4e did you find 1new ms ?? Quote
turbominicooper Posted March 29, 2015 Author Posted March 29, 2015 no 2nd hand kit on jdm-ep, no cracks and will brace so it lasts Quote
5e colin Posted March 29, 2015 Posted March 29, 2015 ouch that stainless 1 !!!!! make sure to brace the manifold and decat on them !!! Quote
turbominicooper Posted March 29, 2015 Author Posted March 29, 2015 ouch that stainless 1 !!!!! make sure to brace the manifold and decat on them !!! on it mate Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.