amatthews45 Posted August 10, 2014 Share Posted August 10, 2014 HeyFitted my omp rep wheel ages agoBut need to get down to the problem on why my horn keep going off. I had to unplug the horn to stop it. The boss has 1 wire and I metal ring thingOn the back of the horn theres two spade connectors for the horn wire.Does it mean I need a wired earth? As you can see just the 1 wire Any help would be great to get this sorted Cheers Quote Link to post Share on other sites
morgey Posted August 10, 2014 Share Posted August 10, 2014 On mine it earthed itself out with the little metal bracket around the horn.One spade connector is connected to earth (same as that metal bracket thing) so if its connected to that it will sound as soon as it comes in contact with the wheel. The other went through the button so that you had to press the button for it to sound. But you dont need to connect the other to anything. Quote Link to post Share on other sites
amatthews45 Posted August 10, 2014 Author Share Posted August 10, 2014 So I could be using the wrong spade connector? I assume mine should be earthed with the little ring Quote Link to post Share on other sites
morgey Posted August 10, 2014 Share Posted August 10, 2014 Id say so. On the button mine had like a 3mm bar half way around it. That pushed agaisnt the boss/edge of the wheel and acted as the earth. Put the wire on one spade and touch the frame of the button on something metal. If it sounds try it on the other one, hopefully that shouldnt sound unless you press the button. Quote Link to post Share on other sites
amatthews45 Posted August 10, 2014 Author Share Posted August 10, 2014 Cheers mate Went to try sort it and battery dead Will go see if swapping the connector works shortly once battery charged again Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.