*sean_glanza_v* Posted January 17, 2015 Posted January 17, 2015 Fitted a race fit rocker cover with no breathers blanked the pcv valve but now the pressure is pushing oil up and out the oil filler cap ? Quote
Whitenoize Posted January 17, 2015 Posted January 17, 2015 Not sure what you mean with no breathers? Have you a n fittings and a catch can ? Quote
*sean_glanza_v* Posted January 17, 2015 Author Posted January 17, 2015 Yea will take a picture when I can basically the rocker cover just has the (AN) fittings on it and it's plumbed to the catch can with no oil breather on top of the rocker cover or catch can Quote
Ollieh17 Posted January 17, 2015 Posted January 17, 2015 Try taking one of of the hoses off the catch can and let it breathe see if it makes a difference Quote
4efteboost Posted January 18, 2015 Posted January 18, 2015 with it setup like that you have all the pressure going to that catch can but its got nowhere to go so its just going back and pushing past the oil capwith that type of catch can you need to have both pipes from rocker cover to go to the same inlet on the can by using a t piece and on the outlet have a bit of pipe pointing to the floor with maybe a little filter on it so that way its letting the pressure get out To test it you should disconnect one of the braided lines to the catch can and run the car, if it runs better then you know thats the problem Quote
ROTABOOST Posted January 20, 2015 Posted January 20, 2015 Best bet is buy a decent catch can, that setup will just end in tears Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.