Jump to content

Recommended Posts

My EP82 obsession :)


its along story but to keep things simple ive owned the same car twice and don't ever intend on selling her again.


I don't often use the car, (have other cars and a work van) but would like to start using it a bit more this year.



im doing an engine refresh at the moment as the 7 year old forged engine was starting to smoke on over run, it should be finished in the next few weeks hopefully.



here she is, taken last summer


DSC00299_zps9bf7d224.jpg


DSC00303_zps41cf1d73.jpg



DSC00435_zps5304b5da.jpg


Edited by Ash-GT
Link to post
Share on other sites

SPEC - will update this as and when parts change

Engine

Dave burwash built bottom end.
head skimmed/cleaned and rebuilt and painted

zisco valve stem seals
later glanza Block 0.5 mm overbore, honed,decked, notched
wiseco forged low comp pistons 74.5mm and wiseco rings
scatt forged rods with ARP bolts

ACL bearings
1.2mm zep 4 layer head gasket
TRD engine mounts
Speedvision Hybrid ct9 turbo

HKS actuator
NGK irridium heat range 7 plugs
magnecore blue HT leads
uprated 4 branch manifold
decat custom exhaust with only 1 box
tuning developments 255 lph uprated fuel pump
blue sytec pressure regulator with gauge,
autobahn front mount intercooler
Collins dump valve
HKS FCD
gready boost controller set to 0.9 bar LO and 1.1 bar HI
1.3 bar rad cap
rocker cover oil breather filter
air con removed
front mounted pipercross air filter with stainless heat shield
exedy stage 2 paddle clutch

Suspension
Meister R coilovers
Whiteline adjustable panhard rod
Cusco lower arm brace
front and rear strut brace

Interior
front recaro seats from a proton GTI with custom rails
momo race steering wheel
momo gear knob
single A pillar pod with boost gauge
Recaro phone holder
pioneer head unit
Rockford Fosgate 6x9's

Bodywork
rear wiper removed
tinted windows
front bumper smoothed
custom front indicators

TRD petrol cap

wheels/tyres
16x7 Rota GT3
195 45 16 yokohama s drive
blue nuts

Brakes:
groved front discs with green stuff pads
black calipers

Edited by Ash-GT
Link to post
Share on other sites

nice spec list there mate. fresh new forged engines gonna be lovely !

car looks real nice by the way...

Thanks mate, the forged engine had done 35k in 7 years so only needs a freshen up, all in bits waiting to go back together when everything arrives, think I caught it before it went badly wrong and got expensive lol

Edited by Ash-GT
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...