RichWillmore Posted February 28, 2015 Share Posted February 28, 2015 So Im fitting a td05-18g bottom mounted, housing just blocks the oil filter!! Not sure if anyone's experienced this or can help ? Thanks Quote Link to post Share on other sites
maddox710 Posted February 28, 2015 Share Posted February 28, 2015 Might be enough room for remote oil filter relocate Quote Link to post Share on other sites
RichWillmore Posted February 28, 2015 Author Share Posted February 28, 2015 Do you know where I can get one ? Quote Link to post Share on other sites
RichWillmore Posted March 2, 2015 Author Share Posted March 2, 2015 Anybody? Really struggling to find something short/narrow enough to fit in. It'll be close but there must be somebody thats experienced the same problem as me. Setup is a WEPR Ram and Side Exit with a TD05-18g. HELPPP Quote Link to post Share on other sites
RobSR Posted March 2, 2015 Share Posted March 2, 2015 Should just about give you clearance, you'll then need a remote filter head and some an- lines. Pretty sure the filter thread is 3/4 - http://www.burtonpower.com/parts-by-category/cooling-system/remote-oil-filter-parts/take-off-plate-2x1-2bsp-side-ports-3-4-unf-filter-thread-moctopo1.html Quote Link to post Share on other sites
RichWillmore Posted March 3, 2015 Author Share Posted March 3, 2015 Should just about give you clearance, you'll then need a remote filter head and some an- lines. Pretty sure the filter thread is 3/4 - http://www.burtonpower.com/parts-by-category/cooling-system/remote-oil-filter-parts/take-off-plate-2x1-2bsp-side-ports-3-4-unf-filter-thread-moctopo1.html Had a look at that and its just to chunky. I went with a Mocal kit that looks to be slimmer. Hopefully its a problem solver. Thanks guys Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.