turbominicooper Posted May 22, 2015 Share Posted May 22, 2015 found the wiki on rebuilding the td04 but havent found one for the ct9 just need to know spanner size of turbine nut, tried 9mm and 10mm but need to know the half measurment (ie 12.5mm = 1/2")before i can buy one. cheers Quote Link to post Share on other sites
Ricky@Race-Tech Posted May 22, 2015 Share Posted May 22, 2015 The main tool you need is a balancing machine. Without this it simply cannot last, you wouldn't drive with unbalanced wheels so why drive with such a vital component like the turbo out of balance. we can balance it should you require. But our labor charge on the rest is small anyway. Quote Link to post Share on other sites
turbominicooper Posted May 22, 2015 Author Share Posted May 22, 2015 Good to know but what about the spanner size? Quote Link to post Share on other sites
5e colin Posted May 22, 2015 Share Posted May 22, 2015 i used a 10mm metric socket amigo mark the exhaust prop at 12 or so and on the housing do the same on the compressor side blade and housing and over the nut centre shaft so when putting back together you know the position of the blades or find a billet ballenced comp wheel :) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.