loz180691 Posted June 28, 2015 Share Posted June 28, 2015 Rite guys this will probs of been covered but I've got a problem with my dash temp gauge glanza vWhilst driving the needle will rise to just over the min line once stopped on idle the needle will then rise to half way and bring the fan in once I start driving again the needle will lower back to just over the min line.I have had a read up and tried a few thing people have suggested but can't seem to get to the bottom of it There is a spade connector kind of sensor with a one wire plug going to it once I remove this the cars gauge shoots to the top I belive this to be the problem can any one shed some light on this please Quote Link to post Share on other sites
jmmy6990 Posted June 28, 2015 Share Posted June 28, 2015 mine did sameI replace sensor wot spade connector goes on to n never had a problem since Quote Link to post Share on other sites
loz180691 Posted June 28, 2015 Author Share Posted June 28, 2015 Wicked where did you get the sensor from Quote Link to post Share on other sites
DavidAshton Posted June 28, 2015 Share Posted June 28, 2015 Sound like your thermostat is stuck open. Has it been replaced yet? Quote Link to post Share on other sites
loz180691 Posted June 28, 2015 Author Share Posted June 28, 2015 Yep fairly new mate I'm going to do sensor and see how that goes if not I'll be onto next suggestion Quote Link to post Share on other sites
lukEp Posted June 28, 2015 Share Posted June 28, 2015 As dave says Thermostat. Quote Link to post Share on other sites
loz180691 Posted June 30, 2015 Author Share Posted June 30, 2015 It was doing it changed stat and still doing it Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.