Starlet Nath Posted March 1, 2008 Share Posted March 1, 2008 Hello Peeps,Just need someones help who has a 98 onwards Glanza V. (Sicaln ;) )I have the front 2 connectors of the floor loom that came with my 98 front cut, Jay has kindly sent me over a floor loom but it is from a 96 V and only has one connector.So can you look at your floor loom and tell me what wire goes to what?There is a 16 pin connector which has 5 pins used:Pin 7 - Red with white stripe and 1 x silver dashPin 9 - Green with black stripe and 2 x silver dashesPin 13 - Green and 1 x silver dashPin 14 - Red with black stripe and 1 x silver dashPin 15 - Green with yellow stripe and 2 x silver dashesPin 16 - Green with red stripe and 1 x silver dashThere is a 12 pin connector which has 7 pins used:Pin 2 - Red and 1 x silver dashPin 3 - Red with black stripe and 1 x silver dashPin 4 - Blue and 1 x silver dashPin 5 - Blue with white stripe and 1 x silver dashPin 8 - Red with white stripe and 1 x silver dashPin 9 - Green with red stripe and 1 x silver dashPin 10 - White with black stripe and 1 x silver dashAny info you can give will be greatly appreciatedNath Quote Link to post Share on other sites
SiCaln Posted March 3, 2008 Share Posted March 3, 2008 sorry buddy i havent even had a chance to look at the car in the last few months, i work monday to friday in london not gettin home til 8 at night and weekends work both days too, got no time to breathe let alone scope the wiring 4 ya sorry man Quote Link to post Share on other sites
scutch0 Posted March 3, 2008 Share Posted March 3, 2008 im happy to have a look for you buddy, but ive no idea where this connector is for me to have a look?tell me where to look and i take some good piccys for ya :angry: Quote Link to post Share on other sites
Starlet Nath Posted March 3, 2008 Author Share Posted March 3, 2008 im happy to have a look for you buddy, but ive no idea where this connector is for me to have a look?tell me where to look and i take some good piccys for ya :angry:Whoops sorry dudeBoth connectors are under the dash on the drivers side. One goes to the ABS ECU under the dash and the other just goes to another connector Quote Link to post Share on other sites
scutch0 Posted March 5, 2008 Share Posted March 5, 2008 ok, i'll have a look tomorrow for ya... im still not 100% sure what im looking for as i know theres a ton of wiring under that dash! Quote Link to post Share on other sites
scutch0 Posted March 6, 2008 Share Posted March 6, 2008 here you go buddy...loom underneath the sil coverdrivers door switch ( i couldnt get the passenger one out)fuel pumpdrivers side rear clustertopmiddlebottompassenger rear clustertopmiddlebottomhope this helps you buddy. Quote Link to post Share on other sites
Starlet Nath Posted March 6, 2008 Author Share Posted March 6, 2008 Rich,Thats is spot on buddy, but if you get chance.....A picture of the connector where it joins rear loom/looms for the lights would be good As I said before any info is good info.Could you also have a look for the loom part number? It should be right near the front of the loom, maybe even where its under the drivers side of the dash!!CheersNath Quote Link to post Share on other sites
scutch0 Posted March 6, 2008 Share Posted March 6, 2008 ok i might be able to have a good look for you tomorrow mate. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.