jmmy6990 Posted December 5, 2015 Posted December 5, 2015 hi all,just had a forge engine built n mapped it ran sweet for a week but Is now spluttering when it is going on to boostit idle ok n doesn't spluttercan anyone help me?thanks Quote
turbo Grant Posted December 5, 2015 Posted December 5, 2015 Check or replace plugs. Gapped to .7mm and make sure your leads cap and rotor arm are in good order Quote
jmmy6990 Posted December 6, 2015 Author Posted December 6, 2015 ive checked them n every things is in good condition but im still having same problem any one have any ideas wot it cud be?thanks Quote
gorganl2000 Posted December 23, 2015 Posted December 23, 2015 have you done a diagnostic?...checked map sensor and connections to it? Quote
jmmy6990 Posted December 30, 2015 Author Posted December 30, 2015 no faults show on diagnostics n replaced lead still had same problem turns out 2 b emange blue stop working correctlybut thanks for help every 1jamie Quote
MARC MOSS Posted December 30, 2015 Posted December 30, 2015 mine did this when the map sensor pipe had a split Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.