Craigtrials95 Posted January 21, 2016 Posted January 21, 2016 Planning running a vf35 and forging the engine this year.Possible power for this turbo and safe boost pressure on a 4efte?Best spec to build the engine too for this turbo? E.g pistons and rods etcCheers Quote
AdamB Posted January 21, 2016 Posted January 21, 2016 Wiseco -10cc pistonsPauter rods0.6mm headgasket (or 1mm)Toyota bearingsToyota oil pumpWater pumpEngine gasket kit VF35 will pull 1.6 bar, probably make around 315bhp ish. Pretty laggy on a 4E though, much better suited to a 5E. Quote
Craigtrials95 Posted January 21, 2016 Author Posted January 21, 2016 Cheers is it not similar to td04 lag? What sort of rpm would you be looking at the full 1.6 bar? Quote
gorganl2000 Posted January 22, 2016 Posted January 22, 2016 (edited) http://www.toyotagtturbo.com/forums/showthread.php?63889-EP85-CCM-spec-engine-VF35-EMU that's about as good as it gets with a vf35 on a 4e as adamb indicated, its better suited for a 5e it will be laggier than a td04l on the same 4e...maybe 500/1000rpm laggier depending see this tread, near the bottom for the 5e dynohttp://www.ukstarletowners.com/topic/98589-5e-turbo-advise/ Edited January 22, 2016 by gorganl2000 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.