nano

I checked continuity of the tps and it Is good I think. Middle and bottom pin With 0,5mm feeler thers is continuity, and With 0,7mm no continuity. Afr are between 10,5 and 11. Warm or cold. I dont have cold start. The pipes off the throttle body are blocked off.

I used to get 13,7 afr on cold start then 15 when warm. Now I dont use cold start. And all the pipes off the throttle body are blocked off. The idle screw is tightened maximum. I checked the tps and it works good. So on idle I have 10,5 and around 15 when crusing. I ll tell you what is the afr when on boost. My friend says its normal côz I changed parts like turbo intercooler air filer etc, and that I can correct it With my emanage ultimate. I m a bit confused and dont know if its normal or not.

Hi, the aem jauge in the car says 10.5 at idle and Im tryin to source the problem . Intake air temperature sensor, coolant sensor are new and the power supply is 4,90V With ignition on for these sensors.02 sensor is New. Stock fuel system and injectors. Zisco intake mani.td04 turbo With ext wastegate. The problem was already there before installing zisco intake mani and the sensor has been changed With no success. What can cause this rich idle? Can it be a faulty aem wideband? And also the car doesnt smell fuel. Thanks

One week now, still no news. I ll contact paypal to get refund. So this thread has to be in thé negative feedback section

Bump

Ok thanks. If you guys know this seller reputation please let me know

What should I do? Contact paypal and open a case?

I paid tuesday mate 145 gbp. At he begining he told me to pay via bank transfer because he has no paypal. But I could nt pay by bank transfert and I said ok let it go...He émailed me back and said here s my paypal address

Anyone knows about this Guy? Still no news from him

Yeah but I did nt want to post in the negative section, Anyway no after payment I did nt get tracking numbers but he had said to me that he would.

Hi, I paid for a front zisco brace With him, is he a good seller? I pmd him but no reply. If it s Just this ok, as long as I get m'y item. Thanks

Hi, How to wire aem uego jauge to emu option front panel? Do I need the White wire only? Im à bit confused I read some People use 1 wire and some 2 wires. Thanks

Ok, no I thought that cylinders had the same bore, either 1,2, or 3. Thanks

Yes I know mate, pistons numbers matches cylinders numbers.

Hi, today I removed the head of my 4e for maintenance. Anyway I have a question concerning pistons mark. OK on cylinders and pistons number 1 and 4, its written "2" and on cylinders and pistons number 2 and 3, its written. "1" Does this mean that the block is not stock? If I want to put New oem pistons, I must buy 2 pistons mark 1 et 2 pistons mark 2? I M a bit confuse about this. Can someone explain me how it works, thanks

Me too

Sold

Ok I take it. Please message me your paypal address

Hi mate how much to ' France please? Postcode 94600 thanks

Hi do you still have the turbo? How much to france please ?

Would you ship it to France ?

Hi i already have loom and sensor. How much for the unit only?

Interested

Hi how much delivered to France post code94600 city Choisy le roi.thanks

Hi, i need an ep82 GT bonnet. Carbon would be awesome. My location is réunion. Thanks