Jump to content

mattglanza79

Member
 View Profile  See their activity

  • Posts

    367

  • Joined

  • Last visited

 Content Type 

Everything posted by mattglanza79

  1. mattglanza79
    Its a fun car for me so gets a bit ragged. Yea put 30 in back but feels a bit skippy like. Bit was only running 30 on front too
  2. mattglanza79
    What are the front and rear tyre pressure please boys. I have 195 45 r15. Thanks again
  3. mattglanza79
    I rattle canned mine with high temp paint. Lasted about a month and mine aint a daily. Said was for manifolds etc. Wouldnt bother tbh !!!!!
  4. mattglanza79
    Cheers boys. Uses lpg detector. Not looking
  5. mattglanza79
    Was my king lead. Thanks peeps
  6. mattglanza79
    Just looked online there meant to be like that. Had to clean theking lead coil contact so see if that's done it
  7. mattglanza79
    Its the plugs. Proper knackered. Sharp enuff to pose as a needle. No do I fit ngk irridium 6 or 7 or any other plug like bosch etc
  8. mattglanza79
    Defo aint fuel cut. Boost is no where near high enuff
  9. mattglanza79
    Guys. Car has started jolting when on boost. Idles fine and can rev right up with no misfire. Not sure if its missing or a feeling fault. Drives fine off boost. Doesn't jolt all the time either. Nearly diednon me a min a go. And no ecu light and boost down so want be cut
  10. mattglanza79
    Glanza for me. I bought a dog lol. I actually think the seats are ok. More comfortable than my old passat tdi 130 highline. The drive is nice and I think handle well on standard suspension with good tyres. Mine aint a daily mind.
  11. mattglanza79
    Are both hoses getting hot. Remove thermostat and check to see if operating. Failing that could have a air lock. Most water pumps I've ever used on various cars trucks spin free tbh
  12. mattglanza79
    As above. Had a paint spillage need the carpet thats goes on seats and boot floor. In good nick please
  13. mattglanza79
    Can someone explain how as I thought that if you limit it to actuator it will open more when required. Forgive me if I'm bein thick
  14. mattglanza79
    Piggy backs are about £500 ish mate. Took my fcd out and my creep is crazy. Gonna fit it again with a rrfpr and get it on the dyno I think. A lot of the td04 guys do this. Only reason fcd is crap is cause car leans out !
  15. mattglanza79
    Aye lol. What is it then . thought turbo was when slowly lift off
  16. mattglanza79
    Rrfpr and fcd then ? Can't afford a piggy back
  17. mattglanza79
    Hks ssqv3 chatter when lift off slowly !
  18. mattglanza79
    Am I right in thinking that a mbc will help reduce my creep. My hks actuator is wound back enough but hits fuel cut at around 5500 rpm. If so will a eBay job be any good ? And what type too use ? Seen turbo smart ones that don't have the tee piece. These any good ?
  19. mattglanza79
    Or the actual frame that comes with the CD player. If so I have one
  20. mattglanza79
    True manz
  21. mattglanza79
    I have lights on the forkntrucks I work on that never look blownnbut they are
  22. mattglanza79
    Take the boxes off lol. Yea manz GTR all the way. Easily my fav car . but need to check Burneys bid on YouTube of his glanza vs a R35
  23. mattglanza79
    And the glowing zorsts
  24. mattglanza79
    It just sounds the nuts Amjad
  25. mattglanza79
    Haribo starmix. Or cad fruit and nut. Hershey's is nice toooooo . non non
×
×
  • Create New...