Jump to content

Burt-21

Member
  • Content Count

    74
  • Joined

  • Last visited

Everything posted by Burt-21

  1. Hi just wondering if any one has used one of these instead of ecu and map and if it works and there any good a mate has one but I still don't think it's the best way to go
  2. Right so a lot of you might not like this but I have a eBay ct9 hybrid yea I know some of you say there shit but it seems fine what my problem is it has an adjustable actuator on it but it going to 1 bar fuel cut not fun need to turn this down but would I be better to leave this actuator on it or put my hks on then ajust the boost cheers
  3. I'm using one of these turbos and it's fine would never make 300+ bhp but should make at least 190
  4. Burt-21

    Jerky round 2

    No under tray so the waters getting up on to the leads an stuff explains it thanks mate
  5. Burt-21

    Jerky round 2

    So I put a post the other day about this and was told it was the choke but it has happened again this time the car has been driven for about 45 mins I hit a puddle and after the it started jerking/ misfiring what could it be
  6. Burt-21

    Jerky round 2

    So I put a post the other day about this and was told it was the choke but it has happened again this time the car has been driven for about 45 mins I hit a puddle and after the it started jerking what could it be / misfiring
  7. Yea there is heat when driving and while still but I can on have my heater on the window or the whole car steams up even tho there's heat
  8. I have one that opens at 82 I will try it at the weekend and way would it be not opening fully or something
  9. Wires are all fine checked them
  10. No it wasn't over heating but there was a crack round one of the manifold studs so I had to change the head to stop it blowing
  11. Rad hose is fine it was all fine till I changed the head gasket then run a lot cooler but still get hot air coming throught the heatera
  12. Well it's opening fine at 72 degrees or something round there but I don't under stand why it was half way now it isn't or it's under the line when I drive the heater work fine so I don't see why it's stay so low
  13. So here it is i changed the headgasket on my ep91 put it back together now the temp don't go up when I'm driving but at a stand still it go to quater way where as it used to go half way if this ok or not
  14. Anyone got any headlights for sale must be good confusion no broken clips or going milky lets me know prices
  15. I am a powder coating what colour and I will tell you if I think you going to get ripped off
  16. Hi I started my car this morning and started to go to work when I noticed my car felt jerky as if it was running out of fuel or missing when I was to go over 2k revs but seem fine when it has warmed up what could this be thanks
  17. Burt-21

    Horn

    Not a problem it may be that it may not just one reason it might not work mate
  18. I don't think so may have first time I have ever had to do anything like a headgasket
  19. Burt-21

    Horn

    Hi not sure if this will help but mine didn't work on my ep91 I found out this was due to a brass gold coloured pin begone the boss kit steering wheel and it was bent and not making contact try this as a solution maybe Hi not sure if this will help but mine didn't work on my ep91 I found out this was due to a brass gold coloured pin begone the boss kit steering wheel and it was bent and not making contact try this as a solution maybe
  20. Me again I changed the head and head gasket on my car everything is back in the right place but my throttle seems sticky when I start the car and it's warmed up it will idle at 1000 rpm but when I drive it and stop it will idle at 1500 until I tap the throttle the. Drop back down to 1000 any one have any answers on how to fix this thanks
  21. Hi any one have or had this problem my car seems fine on a short run but on a long run when I stop my speedo is reading anywhere from 20 mph up why is this and how can I fix it
  22. Ok so I got it moted and the problem was the pin behind the steering wheel wasn't touching so the was no circuit thanks any way guys
  23. Think I got seats from the same guy was well impressed with the contact he was keeping and arranging for me to pick up fair price in my eyes to
×
×
  • Create New...