RichWillmore

Bwaaap ! < That is all

#TeamCharlie

I can't run a filter on mine because there is no room, I've found the best way to secure the mesh is to use a decent strong jubaliie clip, just make sure it's tight. I would run a filter but there is zero room like yourself. Also keep an eye on the mesh from time to time as well. I have never had any problems so I'm sure it will be fine.

Thanks for the heads up pal, no harm in trying it

Just avoid the beach and change the engine oil often

NOTED ! Ahaha

I run mine open never had any issues..depends if you can afford for it too go wrong tho i suppose. Wouldn't personally mesh it..a) its quite restrictive and b ) theres a very high chance it'll suck it in if you turn it upto 2 bar. Cant you get a tight 90 degree bend on that? Hard to tell from the pic!

Yeah we'll see. The outlet is 50mm on compressor housing and there isnt 50mm of room between the remote head lines & turbo. Its a tricky one, although it wont be ideal, mesh MIGHT be my only option. I'll try a few things out first & see how i get on with the mesh.

mine looks just as tight as that and I got a 90 on it but had the cut down the length of joiner

It is very tight, got any pictures bro?

Thanks

I'll send some pictures over!

Thanks bro.

Im deffo doing this on Saturday.

Can try and find a Mothers Day Present at the same time as buying my Splash Guard :')

Just run some mesh! Pussy ;)

haha im tempted but its finding a decent way of securring the mesh etc.

Looks awesome dude!

you have the same problem as me with my compressor housing, im using a TD05 20G and its flamin tight to the oil filter.

have you got a link to the mocal oil filter relocation kit you bought?

I dont have a link pal but i literally typed in ebay; Mocal Oil Starlet. It said universal but it doesnt fit as pictured. You will need to take of the Power Steering Pump and trim the bracket down but was pretty straight forward.

Good Luck

Yea it was a mocal one - wrong pic tho i think..

Whats up with it now? is it the wheel moving when you grab on to it and move it? If so, check the bottom of your coil overs are properly tightened where they meet the hub. You'll get the same symptoms if thats abit loose. Caught me out on an ep i brought before.

Its the wheel, disc etc. I'll check saturday anyway, if not i have a guy on fb who has a " good " hub.

Also not sure if im going to get a filter onto the turbo LOL

maybe try jdm-ep? socks should have stock of these

Had a little look and cant see one.

There is a guy on fb that i have spoken with about one, but wondering if there are any closer to me

Hi Guys,

Fitted two bearings now, only to realise its probably the hub seen as ive done 0 miles and the wheel moves drastically back/forth.

Im after a front passenger hub (complete with bearing etc)

If anyone has one, please get in touch...

I will request price and pictures on response

Thanks

Did you get the one i sent you? Hopefully it'll sort the problem dude. If not i have another solution that would work...

I got one from Mocal pal, it fits with some modification to the Power Steering bracket

=l

It is fitted, and all is well, sort of ... NEW PROBLEM !!!

I'll upload the next problem after lunch.

Ohh and i fitted a new wheel bearing (Front Passenger) its done 0 miles, wheel moves drastically. Deffo need a new hub.

I'm hating on cars today... Ahaha

Looking good bud pm me where you got the oil filter relocation kit from I need one to do the same on mine

Will do bud, Fingers crossed it's pretty straight forward and i dont need to re-think.

Either way i will keep you posted.

So i bumped into an issue. Not the kind of issue im used to facing. Bascially the "windmill" Td05-18g is slightly too large to be bottom mounted. Previously it had been top mounted by Charlie but it never crossed my mind that maybe, just maybe it was slightly to large.

Fear not ... I think we have a solution on its way in the form of a Mocal Remote Oil Filter Kit.

Just hoping the one i've gone for is slim enough to fit between the gap of the turbo.

Heres a couple of pictures to show you what im getting at ...

I dont want to have to change turbo's, so im determined to make this work. Oh yeah i also picked up some new gaskets from ID-Workz, which were rapid with delivery as usual. Thanks again boys ...

Should just about give you clearance, you'll then need a remote filter head and some an- lines.

Pretty sure the filter thread is 3/4 - http://www.burtonpower.com/parts-by-category/cooling-system/remote-oil-filter-parts/take-off-plate-2x1-2bsp-side-ports-3-4-unf-filter-thread-moctopo1.html

Had a look at that and its just to chunky. I went with a Mocal kit that looks to be slimmer.

Hopefully its a problem solver.

Thanks guys

So on this.

Nice progress and some tasty parts there! I presume you won't be a stranger to some track work?

Yeah its built to be driven hard so that it shall.

I was orignally going to get it painted and all clean and pretty, but i just like how raw it and pink it is

Anybody? Really struggling to find something short/narrow enough to fit in. It'll be close but there must be somebody thats experienced the same problem as me.

Setup is a WEPR Ram and Side Exit with a TD05-18g.

HELPPP

Do you know where I can get one ?

So Im fitting a td05-18g bottom mounted, housing just blocks the oil filter!! Not sure if anyone's experienced this or can help ?

Thanks

Rich

Canvey is ten min drive from mine..

But i thought cameras r their now, so yet again not what it was.

Maybe it change with the warmer weather.

I was down there a couple of months ago and didnt notice anything but who knows!

And deffo, i'll keep you posted if we get something sorted!

Only acceptable if you're a female, bro.

Nah thats not true. I just need a real girly name for the V.

Like Vagasil !

Different but definatley cool.

Be good to see the fabrication and design thats going to go into making that work.

Keep us updated.

P.S I love the fact you name your cars.

I've decided i now need a name for my Project and Car.

Thanks pal.. should b back up lakeside from april

Im looking forward to some Lakeside nights.

Went the other week and it wasnt bad but wasnt what it was.

We used to have a couple of similar locations more local, cranfield, newport pagnel but they got really hot.

Was fun whilst it lastest.

Maybe you should venture down to a Canvay Island night ;)

Right guys, keeping it simple.

I have a Forged 4E running td05 18g, 550cc injectors, WEPR Ram & 3" Exhaust.

Using EMU currently.

Where have people been for mapping a similar setup and what power did you make?

Any advice on good/bad experiences with mapping please feel free to share,

Just looking for some honest feedback before i choose where im going to go...

TIA

Yea pal.. Mine was less Laggy only a slight amount tho..

Check my build thread for my print out at 1.3bar.

Yeah man, nice thread

I just had them tapped and put screws in.

Looks much easier and if i decide to ever change colour i can just pop the baffle back out.

Simples