BurtEP82

Thanks for the reply triple Definitely hitting boost, 1st and 2nd it's still pulling but dies out after with the wooshing present. Im pretty sure it's the actuator playing up, preload is there. I've had a couple replies with the thought of actuator. Think I will source a new one. Still baffles me how this has occurred only since fitting brand new turbo, was surprised to hear that speedvision is essentially Chinese! I shall update when problem is sorted. Thanks again to all

Wow, China turbo? I bought it under the impression they were good turbos. Did think that maybe the actuator was poor. Talking to them directly they only stated that it must be a boost leak, even after telling them that I had tested all pipe work thoroughly, and that surely the only place that could leak after fitting a new turbo would be hot pipe gasket, which was newly bought. I do feel that it could pull better than the standard. Would a shoddy actuator give you the sound of wooshing leak though? I'm adamant that I will be searching for a hks actuator to eliminate it none the less. Cheers Colin, much appreciated

Since fitting a speedvision hybrid ct9 imported from the us the car just isn't right. Whenever full boost comes on there is the classic wooshing noise of a boost leak however, since fitting I have replaced cheap blue piping for red samco (red is the scheme I want anyway 😁). I have smoke tested the complete inlet system with no leaks detected. I am running pressure purely on the actuator itself guided by my gauge. The question is, do I need more control over the pressure or is it simply that the actuator is poor. I'm just baffled by the clear sound of boost leak and no power in higher gears after all I have done is replace turbo. Any suggestions are welcome Thanks Tom

Drivers genuine wind deflector for mk2 ep82 needed, ideally with mountings. Cheers

Cheers doc, Sounds like you've triad it so will take your word for it.

I may have to save the pennies and study your tutorial, which is cracking by the way. Thanks for the info wepr

Don't know if anyone has tried this or if I'm way off. Fitting a new actuator, I was wondering if instead of continual adjustments when piping hot until correct release is found, would putting a mightyvac on when cold give you first time winnings? If so, would you set it at desired boost just as the wastegate lifts off or at full opening? Any insight appreciated

Am I right in that wepr is the only one about for internal gate?

Looking for a ram style manifold for internal ct9

Looking for red intake hoses. Easy to find red coolant pipes but struggling to find intake in that colour. Any leads welcome. Thanks

Ideally white but what you got?

15" white wheels. Cash here for the right set. Thanks

Thanks for the post Aamir but my mate has them on his car so don't interest me I'm afraid

15" wanted for ep82. Preferably white and 5 spoke but post if you have anything. Thanks all

Mark 2 Black gt Chassis- EP82-043

That's cracking, best spotted I've come across!

Tein. Front and rear, came with my car so don't what the drop is. Can send photos via text or email, part numbers visible. £60 + postage

No questioning their service. Have ordered a couple things from them. One of which took a couple months to arrive but was out of their hands. One of few top guys when it comes to our love/hate beauties!

Cheers bud, I shall search. Didn't realise they would stock this

Feel your pain morgey, usually is a tight crack off then easy unwind. Big pair of mole grips just inwards of the ball joint will budge it, have even managed to loosen them with parrot nose pliers before. Albeit on different cars but all rack set ups are basically the same. Angle of the provided spanner placement isn't always friendly, grips help with, well 'grip' in such circumstances. Touch of lock tight on your new rod and tighten up the same way.

Needing an outer cv joint. LSD gearbox, I believe the joints differ to standard? If a shaft is all that's about then will take it. Offside needed. Even better would be info on oem quality replacements. All leads appreciated

I'm sure it is but I don't have funds to change setup right now. Speedvision will make me happy, for time being at least. Cheers anyway dude

Is a boost controller needed alongside adjustable actuator? Looking for advice for when I get a hybrid ct9 next month. Appreciate all input

I can vouch that all journal turbos are designed with a small amount of play in from new, they need to have it. Very tempted by this but have now got in my head that I'm getting a speedvision hybrid. Glws chops, if it's somehow not sold already

Sorry, said the first one wasn't accepted.