EP70-PT

but how did the rest went? are you getting the box?

looking for some without huge shipping to France... Saw them on ID-workz and bought my cam gasket before seeing them so I couldn't combine the shipping... not paying 14.95 shipping for such a small thing ahah... Sorry guys!

Get some glanza calipers

That bay is sick ahahaha

The first one isn't adjustable, I'll take the car to a bike shop, they'll know what to do ahah

I get it mate, every throttle needs the same amount of air going through or it won't work, I need to balance them

A vaccum problem would throw me a code I think

Yeah I see what it is, I've been fiddling with the screws for a while but without the tool it's a guess job...

This is getting interesting!!

I'll go to a bike shop to get them balanced, seems to be a pro job...

A lot to take into equation then.... how do I check the vaccum??

Could it be my fuel pressure? (Oem reg) or the fact that I'm really low on fuel???

Nope not that, I also noticed that when I remove the sensor, I get pops through the intake ahah

could it be that?? How exactly do I set it up?? should I turn it a little more?

So, as I installed my ITB's, I had to remove the Idle control system and the little 3 pin green sensor thaat was on the old throttle body, my problem is now my idle is hard to fine tune and if I leave it off, the CEL pops on with the idle control code, is there a way to control my idle better without my car dying in the first 10 seconds after starting? already tried the screw on the ITB's and if I go any further it just accelerates to redline ahah, can I trick the ECU without affecting idle? Cheers

now that is sick...

Is that the FHE intake?? how well does it work with a turbo??

Will this one work?

http://www.ebay.ie/itm/FUEL-RAIL-ADAPTER-With-AN6-Tail-For-Mitsubishi-Evo-4-up-TOYOTA-NISSAN-SUBARU-BK-/161799999691?hash=item25ac0810cb:g:yCsAAOSw9N1V1Y6Y

AN fitting won't work me, need a normal nipple, gonna look in that shop you showed me, thanks a bunch mate, always here to help

Post the engine pic that puts a smile on your face everytime you see it ahah (N/A, Turbo, stock, modded, clean, dirty, everything! Just post it!! )

Didn't see any thread like this so decided to make one, and yes I love my engine ahaha

I'll start this

Need to get one.. they're stupidly expensive on ebay though.... 30€ shipping for a little piece..

http://www.ukstarletowners.com/topic/48672-ep70-engine-conversion-guide-4e-fte-power/

Here you go mate!

There's nothing, just a recess to put a O-ring

they just bolt on the rail unscreww the original 1 and put some vaseline or the likes on the rubber of the rail adaptor so not to cut into the seal

Hey guys, got this with my FPR, will it work on the rail? Want to be sure before taking it all apart...

Oh and any ideas on how I can install it without leaking fuel everywhere??