Sportif 4efte

Could you keep the Loom till payday mate? Get paid on 16th..?

98 engine mate, the Loom should have a orange connector for the interior Loom side..

You mean the top cover?

Glanza v engine loom required asap uncut and complete, from a manual car..would need pictures of the interior side connectors as the one I'm after has an orange connector on the interior side..

Mate do require it jus on a tight budget atm depends how much u want and if u got sum pics mate what's app them to me..pm'd you cheers...

Hi all, Here is a list i created when i was doing my n/a to 4efte swap. It will help all you guys that are planning to do your swaps in the near future. If there is any thing that needs adding please let me know . My personal most important thing was a decent set of tools. The last thing you want to happen is to have to get some to take you tool shopping halfway through because you haven't got something. Close second was telephone numbers. Helped me massively. You will need: Engine lift A good trolley jack Axle stands Lots of cardboard to lie on or a car creeper Engine Oil (if it hasn't already got it) Gearbox oil Coolant A good set of tools A 4EFTE engine & ECU An n/a & turbo loom made or a Glanza engine & interior loom with the dash The 4EFTE power steering pipe A few of you to do it Telephone numbers of people who can give advice or help Lots of patience To Do: Remove oil Remove coolant Remove gearbox oil Remove radiator Remove exhaust Remove Speedo cable Remove accelerator cable Remove petrol lines Remove gearbox hydraulic line and clamp up. Remove gearbox cables Remove power steering pump feed Remove battery and bracket Remove brake vacuum pipe Pull Amplifier power cable into car (if you have one) Remove ECU Pull old loom out of interior Remove old sensor on firewall Remove bonnet Remove bumper Jackup and place car on axle stands Remove front wheels Remove drive shafts from diff Hook up engine lift and tighten Unbolt engine Lift out engine Clean engine bay Drop 4EFTE in Jack up gearbox into postion Bolt in and remove lift Put drive shafts in Fill gearbox with oil Fit gearbox cables Fit petrol lines Fit gearbox hydraulic line and bleed it. Fit power steering feeds to pump. Fit brake vacuum pipe Fit radiator Fit FMIC or TMIC Fit BOV or block off BOV hole Fit radiator pipes Fill radiator with coolant Fit exhaust system Fit Speedo cable Fit accelerator cable Fit 4EFTE ECU Plug in Loom to interior Fit amplifier power lead Fit MAP sensor Fit coil pack Fit bumper Fit bonnet Fit wheels Jack car off Stands Remove axle stands and lower car Fit battery Remove the injector connectors Turn key Let it turn over for a few seconds Connect injectors back up Start engine and smile Sportif 4efte

Need a cheap set of coilovers.

Nice one mate bought it ;)

Does anybody have a pair of Glanza ep91 starter motor bolts?

Need a 98 Glanza v throttle position sensor if anyone got one cheap? Thanks guys

Have you got rear seats bench? Pm me price if so mate Inc delivery

Coilovers sold?

Have you still got the ep91 dash?

Thanks rich mate

Mate would u take a deposit?

Require and wepr front mount or hdi on a budget if any one has got pm me with pics asap thanks

After an Intercooler front kit if any one got one (td04 fitment)

Engine got dropped in today successfuly, Tmorw will get most alcinarys connected..took a few pics but because of shortage of light flash of my Samsung s5 made the light bounce off the silver/chrome engine bay...

Could do with an updated clutch later on but I'm just making sure atm, theres no problems with engine and if it turns over...it did turn last time I had a go by hand using a ratchet..

Update time again got gearbox and clutch in today yuppe

Sorry pal jus read add your after Glanza one..

Mate got a standard Starlet sportif bumper in stratos green. Would need to arrange collection with courier paisley freight are decent..

Engine bay got bit of shine back Finishing it of tmorw.

Got one atm mate thanks though

Engines out by the way and up for grabs pm offers. R reg 97/98 84k 4efe n/a, Complete with gearbox and inlet with throttle body Mint runners as most of you knw Never had a problem with it. Nippy engine fast for a 1.3 Sold in picture as it is freshly removed yesterday.(just keeping the speedo cable)