200sx-Starlet-Jay

alrite pete its all about knowledge, trial and error. and lots of cash! go to parts, switch and change them, try different set ups, keep going to the dyno and checking what youve done! if you click on the thing that says NIM at the top of the page, then click on requests, u shall see all the people who have requested to be ure friend. just click accept. this enables you to use an MSN type messenger and allows you to see who is online at any time. let me know if u need more help!!

yeah sound mate, no worries!!

just messed around with the tuning on my teggy, and its gone from 411, to 512bhp and 402 ftlb!!!!! miiint

lol, im waiting! "hope your ready to have ure ass handed to ya! " u still aint accepted me oppsaa lol i need to race u!!

lol no it has an uprated block on it, as ive blown engine twice, so have forged the hole thing, low compresion pistons, and all that lark... so it lasts a bit longer now! just got a 50 shot of nitrous! added you all, welcom RicoW

lol its ures mate, but i dont know when its coming off atm!! you after in asap i bet arnt ya!?! i realy want you to have it now!

sound mate! will get on to you next time i see you dude! i take it that means good news?!

integra mate... stil got the 1.8 DOHC engine as well cn afford a new car, they are like £40k for a decent one... so fuck that!

lol shame i just upgrade... running 411.48 BHP @7900 311.98 FTLB@5600 im running insane boost lol got 38 PSI!!!!!!

lol everyone check ure NIM's lol, i should have added u all on there... see ya on the strip! p15tle, lol im addicted to... YOUR WELCOME! gunna have to open up a NITTO ANONYMOUS rehab thread soon!!

that sounds bang on mate, where abouts are you again sheffield? ure mate there as well? when are you getting it finished? Jay

na not atm! my car is shagged, and i cant get cash to fix it as i cnt drive it!

added ya P15TLE lol accept me!

go to race track, go on tournements, think its third down, then click the first race. its a $50 per win, then $500 bonus for winning... dead easy mate. 5 races = $750. just repeat and repeat until ure car is elite enuf to go to the next level of tournaments! get that darn ya

lol yeah this game is mint, was like WTF this is free?!! proper detailed engine tuning as well, like ratios and rr setups and airflow setings, boost controlers ect!! mint! and its the same as real life, e.g low compresion pistons on an N/A will decrease power, same as a 5psi turbo doesnt need a 4"bore pipework exhaust!!! quite acurate as well! put ure user names on list below, then add it to the NIM so you can keep track of who is on and where so we can hook up and race!! Username/ uksc username 1. GTRjay - 200sx-Starlet-Jay 2. 3. 4. 5. 6. 7. 8. 9. 10.

lol my teggy is running 235bhp and 189ftlb! its best time is 13.39! but average 13.5-6! just this second had engine warning light come on! says ive got to replace a conecting rod, one of the valves is worn, head gasket is thin, and block is worn! guna cost me 1.5k to fix, and i have 200 dollars left as i just spent loads on a 20 psi turbo!

go on then bob ross!

any pics mate? need to get somthing sorted, and as i have taken out my stereo, needs somthing to fill the hole!

yeah would have thort that! got a little package through today... but still waiting on half! another HONG KONG gem can ya guess what it is skip?! also im after a replacement panel for an ep91 dash board. tht removes the head unit, and blank spot on the dash, do you know where im tlkinbout? want to mount some stuff there, like boost controller turbo timer, maybe a gauge? let me know!!! Jay

yeah lol, im probs not guna go above 1.1 bar... just for reliability. but we shall see when i get it on the rollers! im gunna ran a JAM ecu , the plug and play ones, so that should be sufficient fueling for these boost levels!! Jay

haha cheers bud! yeah its a little daunting but the fact i will save my self so much money means i got extra to spend on mods!!! plus my mate is a mechanic and he is going to give me a hand dropiing it it, then i got a few mates who run glanzas ect that will help with the initial setup, then gunna take it to a RR and get it set up properly and get a figure!! aiming for 185-190BHP, so should be fairly quick! i left the block together, took the rocker cover off to spray that, and then just masked up the bits on the block, and got some VHT paint, and a half inch brush, and just got painting! al

lolz rite if you are so thick and cannot take on board the fact people have different tastes and are not all interested in spending large amounts on wheels, when other parts can be brought for the same budget, then keep your 2p for a rainy day.. i think quite a lot of people are getting sick and tired of this argument. this has been done so many times on so many forums. i love my rotas and they havnt had one problem. no corrosion ( chrome lip ) no bending, no rubbery spokes, no problems what so ever. im not selling them for jdm rims, never will. these are more than satisfactory in my eyes,

lol each and every one of the spectators are like " DAAAAAAAYYYYUUUUUUUUUMMMMMM"

!!!!!!!!!!!!! LOL !!!!!!!!!!!!! now now boys, lets not take this 2 far, this is a light hearted discussion of peoples opinion if rota. to be onest, if youve said your piece that you dont like em, then just slay anyone who says they do like em after that.. get a life. if you hate them so much then dont look at this thread as the majority of users on here like em, and a large number have them. yes JDM wheels are nice, i fuckin love them. yes we realise they are expensive. i have them on my car, so blatently i am so poor, i cnt afford to piss in a pot. rota are cheaper, but certainly are

Waiting on some glanza side skirts, in white from Ramsey! cant wait to get them on the car, its realy lacking agression on the side of the car, hopfuly these should sort it out! praying for arival on saturday!!! if so im guna be a busy chap. anyone know what the best way to fit them is? Jay