GT Phayer
-
Content Count
1523 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by GT Phayer
-
bump
-
bump anyone have any ideas ?
-
the one i used was a normal front side light bulb was the big bulbs not the small ones mate
-
i changed the bulbs in the back of the cluster to could this cause the problem if i might of hit something
-
did it go after tightening it might be like a top mount just put a bar or everything mate
-
is there play in the rear wheel mate i had this and it was the hub nut loose ?
-
well my starlet will be back on the road soon and ive herd that standard front brakes fade easily ? i was just wondering what brakes to go for as ive read mixed reviews also ive seen people using gt4 brakes is that just the calipers or the hole lot ?
-
Ive just bought an engine off here and was just wondering the change interval for a kevla cambelt thanks.
-
well today i wired up my safc2 and i havnt had the ignition on for nearly a year and when i turned it on the rev counter went up to 3,000 rpm then stayed just above 1,000 rpm and then droped down when the ignition is turned off ? the engine was not running just wondering what it could be the wiring is wired correctly just wondering what else it could be thanks.
-
turn the engine over so the hole that says 4e is at the top and look throught and you should see the little dot if not turn it over again and untill both line up mate
-
the hole next to were it says 4e should line up with a little dot on the engine behind the pully its like at the 12 oclock position mate
-
if you look at the front of the cam pully it will say 4e and 5e on it mate ?
-
on the crank pully there will be a v cut out on it just line that up with '0' on the timimg cover then on the cam pully like the 4e hole up with the dot on the cam cap hope this helps
-
216 nm mate http://www.toyotagtturbo.com/forums/showth...TE-Torque-Specs i had to lock tight mine to it kept coming loose
-
hahahaha lol
-
has a certain torque setting mate its pretty tight basicly crank it right up to secs il find the torque setting
-
is the nut coming loose mate i had that on my sr ?
-
take the pads out and give them a grease mate and see if the piston in the caliper pushes back ok and that the sliders are free then go from there
-
i saw this one but not sure yet mate http://tuningdevelopments.co.uk/proddetail...prod=SpecPaddle
-
next on the list is the clutch and then LSD gear box and spray inside + outside cant wait to finally come to a meet ;)
-
cheers mate got to do some of it again as its gone saggy lol will get more pics up when its had a good clean
-
been a busy bee today and got the engine in and all back together just needs a tidy up now just waiting for the clutch Another big update next week comments welcome. Thanks.
-
changed the clutch and its fine mate
-
its got a bigger housing on it and extras so it will produce 400 bhp
-
What would you do if you won the lottery
GT Phayer replied to GT Phayer's topic in Lifestyle General
^^^^^^ hahah lol