Ryan

Yeah mate he means the valve seat

Yeah if you dont have a boost controller you just run your vacuum hose from the compresser housing on the turbo to the bottom port of the wastegate and leave the top port venting to the atmosphere. heres a link to tial air fittings tho if you want them mate CLICK not sure about the collar tho i have a v band tial wastegate and on my mani were the wastegate sits there is a groove notched out for the collar to sit into so i needed it to fit mine

Get a good ecu and a good map on it

glad to hear all is sorted mate

put the gold one in it should be 0.5 then

thats exactly the way mine was mate . Put the big spring in it should be 0.9 bar. Take it for a test drive to make sure. Have you a fcd and rrfpr set up or any sort of management because it will hit fuel cut if you dont heres the spring chart CLICK

i had this problem mate. There should only be 1 spring inside. I had two in my wastegate and the car was trying to boost to 1.3 bar. Took one out and took the car for a test drive and it boosted to the 0.9 bar i was told the wastgate would hold.

Thats it there been looking for a pic

I have the race tech TD04 kit an never had a problem with anything hitting the standard rad. Never heard of anyone taking from the inlet to the wastegate just from the compresor housing of the turbo. i could be wrong and you can do it both ways. Only other things i can think of is a vacuum leak or the collar that goes between the wastegate and the mani

The bottom port on the wategate should be plumbed into the nipple coming of the turbo and the top port left open if you dont have a boost controller this way you will only run the boost of the spring in the wastegate. What spring rate is in the wastegate?

Have you a vacuum hose coming from the nipple on the turbo to the bottom port of the wastegate? Have you a boost controller installed to?

Was thinking about buying this kit. Would like to know also how you fit it

Peugeot 306 with black smoke pouring out the back of it

I will wait till tomorrow and see if it comes and if nothing shows up i will send him another pm over on tgtt to see if he has definitely sent it out

yeah waiting on a door handle from the glanza he was breaking. Would have went down and got it but the car was off the road and i was mad busy

I have been waiting on a parcel from the south from monday. Normally get my post delivered right and quick to

I think the Vf series turbos fit mate. Sure someone will be along to confirm this tho

yeah the young lad is McKeever he is from N.Ireland some pilot for a 15 year old

seen one of these last nite unreal looking. Best of luck with the project mate

TBH mate i know what proper drifting is have been following prodrift and driftworks for a right while now. what drew my attention to the vid was the lack of sense on track and just going balls out

Want a bunch of crazys

What about Mugello in the HKS evo?

Finally got my live sorted mostly on forza and fifa my gamer tag is RYAN028

X2 going to be miles better than GT5

Dunno if this is a repost http://www.youtube.com/watch?v=8Ex6f...layer_embedded Cant wait