Ryan

Seeing as the internal wastegate dumps into the downpipe i couldnt see this setup giving it a bit more grunt. If you want more noise let the external wastegate dump into the atmosphere through a screamer pipe

Seen a place on a local forum its in ireland tho not sure if they do wheels but it wouldnt hurt to e-mail and find out LINK

everyone i know always takes there cars to get washed the day of the test just to make sure. You hear horror storys about testers refusing to test cars that are dirty underneath. Mot is hard enough to get through so it saves you failing on somthing so stupid ;)

Quinns used to do this but they have stopped it and its now for 25's or over. TBH this is one of the reason's why young insurance is so dear. Young lads are insuring a 1.1 saxo and driving a Evo, Skyline etc and crashing and killing themselves. Heard and read about this alot happening over here and thats the reason quinns have stopped it

that is one of the Zisco lads car. I would say its running a full standalone ecu with launch control not a bee r Heres a link on TGTT about it CLICK

Crazy entry into that first corner

Do it right do it once mate go for the like's of tial

You will need to take it to someone that will set up the RRFPR and FCD to make sure the afr's are right

mark luney's supra is such a animal

brings me back Havnt listened to stuff like this in a long time. Will have to dig out the old harddrive DAYMAR -NOW'S THE FUCKING TIME

I have never used a bleed valve before mate but i assume that a vac hose comes off the turbo tee's into the bleed valve and runs to the bottom port of the wastegate then run an other vac hose from the other side of the bleed valve to the top port on the wastegate. As for turning the boost up is there not a knob at the top you turn to up the boost? Just turn it abit at a time take it for a run keep an eye on your boost gauge and take it from there

Yeah you can do this. Run a Vac hose from your turbo to the bottom port on your wastegate. Take it for a run and it will only boost to the spring pressure. If the spring pressure is to low go for the bleed valve to raise the boost above it

My TD04 kit

I have yet to play this game. Saw the advert for undead last nite will have to go out and get it now

is it a aftermarket flywheel ? pm the make and a price

1.34 luke finks car pure legend

i have a zisco external wastegate mani and a external wastegate for sale mate in the for sale section

yeah mate you can use a boost controller to raise the boost above the spring pressure. You might be better of with a stronger spring tho the 7psi might be a bit weak to hold 1.2bar. I would get a 0.9 bar spring or a 1 bar spring for it

its more funny than scary. When she got dragged away i was in stitches

seen it last nite was bit shit and boring between the scary bits didnt like the ending and its not as jumpy as the last

epic mullet man

UK spec scrap! thats the way they are treated over here and they still sell for 10 grand or over. Seen some UK ones sell for near £14000 pure madness. They are starting to buy jap models now and turn them into uk spec because they are cheaper to buy and arent rusting away.

Check out this crazy kart and the mad mullet man driving it

Feck Doesn't look good