-
Content Count
336 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by paddy
-
-
Bump someone must have one, do anyone know if the n/a has the foot rest pedal?
-
Bump someone must have some can post a picture if needed. They come on the standard car
-
-
-
In need of the bonnet catch cable for a glanza must be in good condition
-
Was fuel pump, had a quarter of a tank of brown petrol, took off tank blasted it out with a jet wash, replaced fuel pump, now runs lovely
-
Very helpful many thanks
-
Has anyone pictures of a hel abs delete kit fitted or a guide to fitting one? Cheers
-
Bump
-
Bump
-
In need of the plastic foot rest piece that sits to the left of the clutch pedal from a glanza, n/a may be the same
Let me know
-
I'm after a pair of the small mud flap bits that sit behind the back wheels on a glanza
-
Now sold
-
I have a project glanza. Been dry stored for 6 years, it's up and running now, been trying to bleed the brakes today, the other 3 bled fine but the passengers rear I'm struggling to get fluid through, I had a tiny little bit come out but now nothing. Any one got suggestions what could be stopping it? I've been using a Mitty vac to draw the fluid through
-
I've ran 2 jam ecu's over the past 6 years, 2 ct9's, 2 hybrid ct9's and a tdo4, all at 1 bar boost , there brilliant would never concider emanage (unless going forged) the jam has always suited my need very well, there well worth the money, and u can unplug it and sell it for what u paid for it once your done with it
-
Also does that stock fuel pump make any noise, it's getting fuel to the rail but how do I tell it's working?
-
I've got a project glanza that I've just put back together but it won't start. It's not been run for over 6 years. It's a fresh gt engine, It has a spark on all 4 plugs, everything's plugged in, earths are in place, 12 litres of fresh fuel, it has fuel to to end of the rail but I'm not sure if it's quite enough. I've got a new fuel filter on the way, anyone got any suggestions on anything else to check? Timing is spot on on the cambelt
-
-
I'm about to fit an electronic oil pressure gauge to my glanza, it has a sensor for the gauge that u put in the place of the original oil pressure sensor. What shall I do with the wire from the old oil pressure sensor? as I would have thought the oil pressure light will stay on. Can I attach the original wire to one of the wires for the new gauge to keep the light working as well as the gauge?
-
In need of an electric drivers side 3 door window, na or glanza, a glanza passengers seat and glanza door cards, preferably with window switches, can collect from Essex/Cambridge area
-
As above need a set of lowering springs, only need 1 but will take a front pair or full set
Message me
Cheers
-
Looking for an arc top mount intercooler, I have a front mount I may be interested In trading, mainly don't wanna cut my front bumper
-
Would be brilliant gonna have to put a standard one on if not. Open to all options, a pair of fronts or cheap full set...... message me payment waiting
-
In need of 1 front tein lowering spring as mines broken. Will take a pair or a full cheap set of other aftermarket springs, what u got???
Rear Mud Flaps for Glanza
in Wanted
Posted · Edited by paddy
These bits that sit inside the bumper with the 10mm bolts
My project glanza is missing them