Jump to content

paddy

Member
  • Content Count

    336
  • Joined

  • Last visited

Everything posted by paddy

  1. Right I have just had the engine of my glanza out, had head skimmed, new gearbox, new clutch and new cambelt. While the engine was out I replaced the rear main oil seal, it wasn’t leaking but replaced it to be on the safe side. Put the car all back together, runs really well but it has a bad oil leak from crank seal area. So off came the gearbox again, replaced the seal again, re sealed the seal housing, still leaking, re sealed the sump, still leaking, resealed the sump again, still leaking. I’ve spent over 20 hours fixing up car all for this to happen! The thing is the car wasn’t leaking bef
  2. Update - both front bulbs are fine, they’ve not blown, they just do not light up. When the car tries to light them up it cuts the car out. Rear indicators work fine. I tried different bulbs in the front - same problem. Has anyone got any other suggestions? A bit stuck with this one, mot is due next week. I’ve check all earths under the bonnet, nothing is loose
  3. Just had a look, both front bulbs are blown, I’ll get them changed ASAP, is there a relay for the indicators? When the car cut out this morning form the indicators it flooded the engine, was running on 1 maybe 2 cylinders which a huge cloud of white smoke out the back which was un burned fuel
  4. My Glanza died this morning, was going along just fine, went to put my indicatiors on, every time they flashed it cut the engine out, also got a massive smell of fuel from inside the car, anyone have any idea what’s causing it?
  5. Anyone know if it’s possible to get a bearing kit for a OEM LSD gearbox, I can find one for the standard box but not the LSD one. Getting a grumbling noise from the box when it’s cold between 30-50mph
  6. Looking for a silver duck spoiler for glanza, silver rear lip and trd front anti roll bar, anyone got any of these?
  7. I’ve got a couple of glanza ecu’s message me if your interested
  8. Wanted drivers seat belt for a glanza must be good condition, needed for mot as my current one has a rip in it
  9. paddy

    Blank glanza keys

    Been 6 different places now seems very difficult to get a key cut for a starlet these days, anyone got any blank keys?
  10. In need of a glanza ep91 inlet manifold, bare manifold no tps needed cheap as possible message me
  11. Wanted blitz ecu for ep91 glanza, May concider mines what u got?
  12. paddy

    Tein Springs

    Only need 1 front but a pair or set would be alright, tein s tech springs
  13. As above in need of a new clutch for my td04 glanza, prefer a non paddle uprated clutch but what u got
  14. May consider other splitters anything about?
  15. Im after a splitter for a 96 glanza bumper, I was after a Laguna one but seems hard to find one, Im just about to buy a Leon cupra splitter, before I do what other options there?
  16. After a 96 optional front lip for a glanza in silver, may consider 98 spec silver bumper with splitter
  17. In need of a rear caliper rebuild kit, only need 1 side but both sides would be good
  18. After some mintex 1166 pads for my glanza, sure gt pads are the same, or maybe yellow stuff. Just gone from 1166 mintex to standard pads on a td04 glanza, defo a bad move lol
  19. Lost the 1 key I had for my project glanza! Anyone got a barrel and key? It's a 96 glanza, door locks would be helpful to
  20. I have 2 oval shape plug ones here in good condition
  21. I have some acl main bearings and thrust washers, message me if interested
  22. Item For Sale: map sensor from a gt starlet Item Condition & Description: used good works fine Price: £55 Pictures: Payment & Shipping Details: £3 postage to U.K. Payment via PayPal
  23. Item For Sale: GT throttle position sensor tps Item Condition & Description: used works fine Price: £30 Pictures: Payment & Shipping Details: £3 postage to U.K. payment via PayPal
×
×
  • Create New...