Miller_Ep91

update.. got everything sorted this morning , and it was an intercooler pipe so got that sorted. past the mot and then manged to get it on the rollers . it made 173HP and 160 ft-lbs torque . this was made at 0.7 bar (10-11 psi) , and the fueling was in the low 11s high 10s so maybe a bit rich but i just wanted safe before i get the emanage made . can see the bad dip in the graph due to no management I'm happy with it and it feels savage on the road , just cant wait to get the emanage mapped and turnt up to a 1Bar.

thinking of changing the colour of my white grids on my black glanza , anyone got a pic of a black glanza with different wheels . not your usual colours . cheers

yeah boosting fine , not gettin any chatter or dump just a whistle sorta noise, i will have another check round it tomorrow , might be a fmic pipe or summit.

yeah im gutted mate , but least its nuffin major and all will be sorted tomorrow

update... never made it to the rollers lol had car booked in for mot this morning then of to the rollers , bloody car failed mot so never made it to rollers. just a few small bits so in the workshop tomorrow to get them sorted then hopefully off to the rollers on monday . will keep everyone updated also my exhaust it blowing quit badly on the decat (will be sortin tomorrow) and its not dumping properly when i come off the throttle could this be down to the exhaust blowin??

I have no idea what power to expect really , its only gunna be running 0.8 bar for a few weeks untill i can get my emb mapped to a 1bar . Hopefully should see the 200 mark then.

got mine on a running now , waiting on fuel pump (hopefully be delivered tomorrow) then off to the dyno on friday to get the fueling check and hopefully if all is well with fueling a power run. will only be on about 12psi of boost though as need to wait a few months till i can get and map my emb. cant wait. any guess on power peeps? ist gunna be on 12 psi , without emb for a bit , so want really no the what this turbo can do till turn up to a bar and mapped. spec. td12 turbo (at 12psi) weper power up kit 2.25 full exhaust system hdi fmic fse fpr tuning developments fuel pump tuning developm

got mine on a running now , waiting on fuel pump (hopefully be delivered tomorrow) then off to the dyno on friday to get the fueling check and hopefully if all is well with fueling a power run. will only be on about 12psi of boost though as need to wait a few months till i can get and map my emb. cant wait. any guess on power peeps? spec. td12 turbo (at 12psi) weper power up kit 2.25 full exhaust system hdi fmic fse fpr tuning developments fuel pump tuning developments catch can hdi ebs ngk iridium plugs magnecor leads tial ewg probs summit missed but you get the idea engine wise

my map turtles and my little razorback musk turtle

looks smart mate

yeah got the instruction , but it doesn't say anything about the port on the back of the actual unit (the bit with the nob to adjust the boost lol) , not the solenoid .

thats is soo bad and sad , cant believe everyone just stood there , i really cant believe that just insane

bump , someone must have fitted one??????

hey guys just bin looking at my hdi ebc-r which i will be fitting soon , and i wonderd on the back of the controller it has a boost sensor port from engine , can i just run another feed of my boost gauge or my dumpvalve vacum pipe? hope that makes sense.

very nice mate and a good power figure , whats the spec list mate?

i would be interested in this if we could camp the night before the actual track day , as its like a 4 and half hour drive for me, so i am a maybe as it is also a long way off to no for sure. 1. Hou 2. Norfolk n Chance (TOC) 3. badassracer69 3. jason l 4. ste 91 5. Lee Ep82 6. Enzo 7. DavidAshton 8. Gary_EP91 9. Marky J (my mate in Teg) 10.BAZ2CRAZY(maybe) 11. miller_ep91 (maybe)

Dont get rid of the blits ebc , you will need that on the ewg, you can also get diffrent pressure rated springs for the wastegate . For better boost control.

yeah for ct9 mate , kelly other on tgtt made 180bhp on this on a standard turbo in her auto gt,

is does come with a screamer pipe witch isn't in the pic , it bolts on the other flange of the wastegate and ends to the next to the decat so all the gases go under the car looks like this ...

yeah mate it is and ewg type , so you would need to buy and ewg and weld up you penny flap on the turbo are post up a pic of mine when i get it on

get a weper power up kit mate . comes with mani , screamer , decat and oil line because it moves the turbo slightly really is a great bit of kit all for just £364 shipped, Ive got this kit and its really good quality pics are down the page http://www.toyotagtturbo.com/forums/showthread.php?t=13188

very lucky mate, did you put your wheels on last or did a garage? did you torque them up?

thats well stupid I'm also on tgtt but not a paid member, enzo mate the people on here how are passionate about the uksc and keeping it going will donate anyway and if you ever posted up saying the site is struggling i can guarantee 90% of us will be more than happy to help , in my eyes this makes a better site because when people demand money it almost makes everything abit unfriendly unlike are happy little community over here

hows it goin ben is the td12 on and running yet? jonny

high on religion i think mate lol