SooperD

Can anyone tell me what make my alloy wheels are ? i saw a sticker for Vesta inside of them but never heard of em :S heres a pic of the centre cap.

lol.. at last ive done it. Bit of elec help from my bro and now we are all glowing blue ;). If only i knew what the speedo cable end looked like i would have had it done in minutes. Need to push and pull lol.. should have remembered from my old VW days. Back together again now. Onward and upward. Ill take some pics 2nite. Shame i couldnt go anywhere more scenic than outside my house but im not insured or hav a license lol.

Ahh i see.. ill check the LSD thing later. Thanks for the tips sparky mate.. hurry up and pop down. Ull be amazed at how good this car is for the money.. ;)

Yea im chuffed to bits with it all. The exhaust is very nice. Its not in your face like most stainless exhausts. Its nice n deep. Excellent IMO. Will put some new pics up a bit later if the rain holds off ;) Having trouble gettin the dash off. Got about an inch of play from the speedo cable so my hands cant get in there to see what to do :S argh. P.S. The sticker on the inside of the drivers door says ABS(then sum japanese)LSD. Does that mean i also hav an LSD ?? Another bonus perhaps hehe

Well hoorah ive cleaned the plugs and all is fine ;) .. Found out another few little nice things to. Denso Iridium Plugs, Denso Dizzy cap and rotor arm TRD Panel Filter (almost brand new) Fujitsubo Full system Tein coilovers Very happy chappy right now. Ive taken the lo boost off and im just gonna fit my indiglo dials now. Weather permitting i will try and get my KMH to MPH converter on later.

Just ordered a set of NGK's as part of my service. Gotta wait for more cash before i do the rest but wont be driving it so not a problem. Had a nice chat with Dave and he seems to think there may be water somewhere in the system. I was told the engine was steam cleaned and also when i took a lead out last nite the bottom of it seemed to be damp so im gonna whip em all out and dry them off and keep my fingers crossed ;)

Well finally got her back today. Got home about an hour ago lol. I had a few little bonus' when i actually looked over the car. Full Exhaust system with a Jasma plaque on the bottom (this isnt the make is it >?) I think there may be coilovers on there. Only had a quick glance so ill keep u posted. Razo Gearknob and a Quickshift kit i think as the gearbox is solid, no play,very close and a nice positive feel when changing gears. Bad point i found out when the gf drove home. Misfiring like a pig . Probably just needs a good service, i had it £800 cheaper than advertised price so h

Well as far as i know it only has a full system on it. And also noticed the leads are red. Are the standard glanza leads red ? If not hopefully they are TRD's or Magnecores.

What kind of mods should i go for first after brakes and handling ? Actuator ? If possible could you list what i should do. Give me an idea of where to start and what i need to save up for etc. Dont wanna go FMIC straight away as thats bucks. Thanks in advance. D

Agree with Si on that 1. I ran front infinity tweeters, JBL 6x9's on my headunit 50x4 and 2x12" kenwoods on a cheap 600w amp and it sounded great. Take almost all the bass of your speakers and let your subs do that work. Then u get all the nice clean vocals,symbols etc from your speakers without them distorting massively from the bass..

Thats so damn sexy .. Awesome Glanza mate.. Is that number plate Legal ? do you get any hassle of the police ? Seems like a good alternative to the usual big "block all intake" plates

Well ive passed my theory first time, 48/50 and 65/75 on the hazard .. Picking the car up from southampton tomorrow morning woohoo ! . Ill post pics and maybe even a vid on youtube when i get her home. 4 More shifts and ive then got 18 days to tweak,fiddle and play with it .. Cant frickin wait.. Driving test booked for 1st October so keep your fingers crossed for me peeps.

Ive always had pioneer or alpine and cant fault either of them. Sony's are cheapish IMO and also Kenwoods. Althought i have a pair of Kenwood 12" subs which are awesome. I have a cheap 2 channel 600w Amp . American pro or something and its been amazing for 2 years in my old car. Pumped out more than enough for both my 1200w kenwoods. You dont need to match amp and speakers really. My bro had 2 10" JL audio subs, 600w RMS each and had a 400w Rockford Fosgate amp powering them. This was the recommended setup by the ICE shop he got them from. Ive always run the 6x9's and front speakers from

welcome to the club

Fueling adjustments u need a rrfpr i assume ? mine has cat back exhaust and Filter and im going to put a new actuator on. Ive got a Jam FCD.. should i only use it if im getting problems ?

Dont forget my pm too chris ... ill hav your boost guage and boost controller too mate

Cheers for clearing that up wallace.. saw the picture on si's thread about original toyota bodykit and didnt notice they were complete units

with the panhard rod is it advisable even if the car isnt lowered a great deal ? maybe springs and only 30mm i think mine is.. What disadvantage do i have by having the wheels out of line apart from the obvious

am i correct in thinking there are also smoked/black versions of the above pic ? title says smoked but confused me at first with only the clear lens pic.. I may be interested in some smoked/black Same price i presume ?

Is it that much work to relocate ? i see you have a relocation kit. Is that all id need ? obviously brackets would need to made to fit etc.. Is there a big improvement difference over stock location but non stock panel filter and relocated non stock induction kit ?

lol.. sometimes its better to resurrect an old 1 than start a new 1 with the same topic ... im lookin to get an induction kit and im torn between apexi and blitz... Opinions ??

how easy is it to relocate the filter ? or is there a way of getting cold air to the induction kit in stock position ? I was thinking of the Apexi too... Any thoughts on this badboy ? All looks or is it actually worth the money ?

Is it just 1 hole that doesnt match up on the 96 ? im sure someone said that to me.

mmm those are dead sexy.. just screwed on or clipped ? may be gettin a pm soon sheekey mate

if your not worried about cost go for the CLifford.. always a winner.. but the toad is a good buy for the lower budget.. probably what i will be getting.