Amjad

The boxes are very dirty lol won't they tell it's been fitted?

Okay cool, shall I put the old one on or the new one? I just don't want to risk it putting the new one on

What type of grease?

New release bearing

New pressure plate Old FE plate seemed straighter Videos of the release bearing are uploading now. Looks like one or two pucks have been bent out a bit on the plate

Just finished up left the box off, bearing spins freely One of the pucks on the pressure plate looks kind of bent I'll post up pics and a video or two once I've cleaned up

Still same problem, would reverse before but now if you try to get it in reverse the car completely stalls even with clutch pedal pressed Shall I just buy an FE clutch?

Nice one on the extension, think I'll buy one once my student loan comes in a few days

No problem thanks for your help over the last few days too

Thank you for the kind words Gents! It's just a shame I couldn't get all the bodywork revealed at once You too Adam thanks again! Haha tell me about it, stressful for the both of us sheesh! How's it coming along? ;) It's like you read my mind guys, I agree completely and a lip was a plan from day 1. Check back tomorrow ;) Had a proper dog of a job the past two days, but I guess I'll update the thread properly tomorrow when it's hopefully done!

And Ryan was saying it'd be something silly Let's see how quickly we can get it done tomorrow then iA

Thank you so much everybody! Praying that the friction plate is just the wrong way around!

Welcome along! Get some pics up of the motor when you pick it up

Hey all Ryan and I were doing a clutch change on my 4EFE NA, we did the following: -Replaced Gearbox fluid (2L replaced with 2L, drained and filled through 24mm plug on side of box) -Replaced Crank Seal (gearbox side) -Dropped, cleaned, and resealed the sump and bit the Crank seal sits on -Fitted lightened FTE flywheel -Fitted Blueprint FTE Clutch kit -FITTED NEW FTE RELEASE BEARING (came in clutch kit). Was fitted correctly with pins holding it in place -Refitted everything Problems With the engine off and clutch pedal pressed, all gears could be selected With the engine on and clutch peda

Event ticket will only get you in the place but to get on the stand you need to but it through the club Awesome, get it done

I was accidentally sold two times which were in fact the same session on here. So on the day I sold them to another member who wanted to buy it on the day, no problems Get it bought asap, you will not regret it Donington is amazing! There's a list of us going on track in the main thread I believe, get on the same time as us ;)

I can't find rails for £100 any more lol Dunno are they? I wouldn't want to modify the Evo rails, as I'd like the seats to be interchangeable between my NA and GT rather than being stuck with a set of seats that fits one car and not the other. (As I'm currently using the Na not the GT, which I will eventually be using more regularly)

Thanks for the comments guys, I can tell some of you are waiting for me to post "the big update! *Big update!* So I gave a few parts to Adam (aaddzz123) to spray for me. They were in a right state and some will be done at a later date (eg my terribly cracked Glanza Rear Bumper). I picked up the car last night and here's how it looked. NOTE the contents of the big box are about to be revealed haha Over the moon with how it looks! - JDM Reflet Bumper (thanks Charlie!) with all slats removed and smoothed, corners smoothed - MR2 Roadster Alloys sprayed in "R35 GTR Premium Gr

Welcome!

Wow 20! Fair enough then haha

I use this http://www.amazon.com/Panavise-809-Camera-Window-Suction-Cup/dp/B000246ST6 With this http://store.kodak.com/store/ekconsus/en_US/pd/Zi8_Pocket_Video_Camera__Black/baseProductID.156585800/productID.156585900

I want some Recaros haha! They look really comfy, shame the drivers is faded

Cheers Chris! Good to meet you and Lottie and catch up with Liam and Adam! Shame the weather was pants!

Bump

Quick question, with Evo 5 Recaros can you use Starlet Recaro rails or Starlet Bride rails to attach them to the car? If so, does anyone know how much they cost?