redz11

Can't believe my last update was 2016! 

She was back on the road for a while after the Turbo kit was sorted and she made it to a few events, the last one being Japfest 2017 - which was the last show she has been to.. having been off the road since 2018 with a headgasket issue.

Throwback to 2017....

Fast forward, she had been sat in my unit gathering dust and being neglected for a good 2 years to which I ended up finding the sills had become rotten and needed urgent attention, these were cut and fabricated by my cousin thankfully... it could have been worse if she wasn't tucked up in my unit eh..

So since shes been off the road;

- Sills sorted

- Engine bay resprayed

- Rear lock mechanism removed

- Fully undersealed

- Standard Fuel tank removed 

- Full stand alone fuel system fitted with AN hoses to a high flow fuel and lift pump / swirl pot to a FPR and a custom fuel rail

- Wilwood Big Brake Upgrade

- Interior sound deadening removed and dynamat fitted (lighter) and black carpet has been fitted.

- Bucket seats in place of the Evo Recaros (sold them due to needing money at the time regrettably)

-  Original brake lines removed, rerouted through inside the car (need to look at a bias valve at some point)

- Custom ABS plastic door cards created

- Engine & 6 Speed box fitted.

- Engine loom removed to be checked and needs refitting

- S15 sideskirts chopped to fit.. still Work in progress.

- Lower Door mouldings removed

- 25mm hubscentric front spacers fitted (to help the wilwoods fit with the Rays)

- body kit getting prepped and repaired / resprayed

Here are a few little progress photos and the last one of how the car was sitting;

(Both sides the sills were pokable with your finger, my cousin definitely sorted me out for rewelding/fabricating these) 

I really didn't know where I wanted to go with her to be fair, but Im tailing more to the track side of things and looking at some sprint series events sometime, it will not be fun for long drives but it will be fun for those blasts out not to mention that there isn't quite any other car like a starlet 😛 

I will be uploading videos on my youtube channel again if you wanted to check out any of my content. Down At the Unit

do you have the passenger side window reg for sale? 

Good work dude! 

what turbo kit did you have that intercooler hooked up to? 

On 13/07/2018, 12:22:52, Ryan.Truesdale said:

turbo timer still there?

hi yes it is. sorry I've been away off the site for a while pm me 

On 5/23/2018, 7:19:55, Chops said:

Always wanted a vanity tray for the gt (dont judge lol)  rare or not still a bit steep, would buy if u'd come down a little?

can do it posted at that price.

bump amendments made bump

is it rubber? 

2 hours ago, toyotag2014 said:

Yh mate are you wanting me to cut them out and post them to you? 

if you could dude pop me a pm with your price

thanks bud

after 2x top and bottom sliders (long and short) for standard ep82 brakes.. If anyone has any let me know i'm struggling to find them. 

On 03/02/2018, 06:35:19, redz11 said:

Hi bud..  I'm after the middle bits inbetween the bumper (circled below) 

Regards.

Lee 

? Did you see that post bud ?

Ultimately I guess if its taught you a lesson, very lucky to be holding onto the pink licence with such a short ban  we can all slate your speed but I know I have done the same more than a few times.... but lucky enough never to have been caught.

I stick to going a bit more quick where I know no one will be around, police or other road users.. haha  

bump 

Hi bud..  I'm after the middle bits inbetween the bumper (circled below) 

Regards.

Lee 

2 hours ago, 5e colin said:

Think your going to be stuck with the PFC for a long time at that price that's extremely expensive its not even a full kit I payed a lot  less for my full kit  no bits missing  around 300£ there  you have 

Ah fair enough I only prices it at that because I didn't really know and it seemed on par if not better than my old jam and blitz ecus

What's missing from it? I've seen kits without the loom, map sensors gcc etc for like 250 now and again.

just did that, cheers bud :) 

ill host them elsewhere hah! google photos must only work for me.. did seem to easy xD 

Will do when I get home, do they not display properly? 

Having a massive clear out of all my parts that are of no use to me anymore and are just sitting.

Item For Sale: 

4EFTE Inlet Manifold (x2)

Item Condition & Description:

Standard Inlet manifold for the 4EFTE. I have three of these.

Price: £40 £35

Pictures:

Payment & Shipping Details:

Collection LL55 or Extra for Postage, Paypal or Bank Transfer.

______________________________________________

Item For Sale:

4EFTE Throttle body (x2)

Item Condition & Description:

Standard 4efte throttle body

Price: £30

Pictures:

Payment & Shipping Details:

Collection LL55 or Extra for Postage, Paypal or Bank Transfer.

_________________________________________________

Item For Sale:

HKS Turbo Timer

Item Condition & Description:

Not sure if the LCD shows up properly but it works properly and allows the car a cool down time - comes with harness + wires for handbrake connection & also earth. (black & white cables)

Price: £36

Pictures:

Payment & Shipping Details:

Collection LL55 or Extra for Postage, Paypal or Bank Transfer.

_________________________________________________

thanks bud, let me know :)

Do you still have this bud? Ive only just seen this now  

16 hours ago, morgey said:

Corolla g6 with the 4efe 1.3 is a direct bolt on. The 4afe box can be used but need to swap bell housings.

I have the G6 4efe box on my GT, have done for years, best thing I ever did!

anyone have one uncut? or if they have cut it, have they kept the middle bit?

Thank you!

GTbitz have been pushing the prices up for years now.

Good job guys! Worth the effort imo! always refreshing to see a positive change