mini valver
Member-
Content Count
179 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by mini valver
-
A 5e with big pistons ummmmm
-
Not trying to achieve much was just a thought I had
-
If you were to use 75.5mm pistons??
-
And you rate these Phil Eh. The heat range 7 ngk no good?? It was pushing 1.93 bar had no issue but the boost was tailing off so Av ordered a stronger wastegate spring see if that was the issue just a friend said he was surprised I had no issue that was the reason for the question thanks for reply lads
-
Like I say my mate had a corsa with some in running good power engine has done over 20k miles now
-
Just seen them don't no much about them I no a Lad that had a 560bhp cords turbo that ran these with no issues at all but that's a Vauxhall this is a Toyota people's opinions would be appreciated cheers
-
what is max rpm the stock cams and valves can handle
mini valver replied to mini valver's topic in Engines
Cheers lads. The holset I have is a hybrid kind of thing and it's boosting 1.3 bar at the mo at about 4k so it's very good for spool. Need the extra revs just so I can push it but like I say I am in the process of building a head just won't be ready for when I need it so I.e wanting to rev my old head a little bit. -
what is max rpm the stock cams and valves can handle
mini valver replied to mini valver's topic in Engines
My engine is tuned but the only thing left to do is the head. What is stock Max rpm I always thought it was 7800 -
what is max rpm the stock cams and valves can handle
mini valver replied to mini valver's topic in Engines
Just strange they do rev that much if they can not take it cheers for the info tho -
what is max rpm the stock cams and valves can handle
mini valver replied to mini valver's topic in Engines
I am only doing it for a while the head was rebuilt when it was forged about 4k mikes ago -
what is max rpm the stock cams and valves can handle
mini valver replied to mini valver's topic in Engines
Everything but the head race tech custom 1l larger inlet fully forged lightened and balanced 4efte. Godzilla exhaust Mani holset turbo. Everything but the head am on with doing 1now. I thought stock rpm was 7800 Adam b said should be safe to go to 8200 8300 as some of them piggy back ecu red to about that. -
Wanting to raise my rpm for a little while till I get my head built will the stock cams and valve springs handle 8300
-
As stated after the above preferably in blue
-
As stated a gt good working order Sunvisor drivers side
-
Just got a Godzilla manifold and struggling for room with my radiator and room for a downpipe to fit
-
Just got a Godzilla manifold and struggling for room with my radiator and room for a downpipe
-
What boost were you doing on the turbo
-
Seeing if I can get a bargain first mate lol I seen you had them cheers pal
-
As stated I am after a anti lift kit cheers
-
Am after a Zisco wepr redevelopment race Tech any at all so long as it has a t3 flange