ok ive just done mine, the manual i got wasnt that helpful so i thought id make this. would have put the pics on but my phones playing up 1. Take the rubber cover off your headlight bulb, and disconnect the 3 pin plug on it. 2. Take the bulb out and make the hole in the rubber cover a bit bigger so that the bulkier new hid bulb will fit through it. 3.Then unscrew the chrome bulb protector, and fit that in the headlight, and lock it down with the headlight clip. 4.Then replace the rubber cover, and put new hid bulb in and screw to tighten in place! 5. Next get the ballasts should have two or three wires coming off one big plug which will plug into the big loom you get with the kit. 6. All you do after you have both sides like this you can match the other wires in its easy from there!! 7. You will have to earth it on each side, and wire the one near the battery up to the live and neg 8. Check everythings plugged in (no loose plugs/wires) and try........ Im not brilliant at describing lol nut im sure its better than that manual!!! these are 10000k: not as blue as id have thought....