jeffrosie

The reason the discs need to be skimmed down to 260mm is because of the hub. But done research and looks like the Corolla hub is a direct swap for the Starlet hub meaning that 275mm discs can stay. Outer spline on CV are the same.

Want CD or SR clocks. Glanza clocks would look wrong with the Hi Lo boost lights.

That I cannot say mate

Want my 5 door Sportif lowered. Will these work http://www.ebay.co.uk/itm/Toyota-Starlet-1-3-P9-96-99-Kilen-Sport-Lowering-Springs-Kit-964402-/291360227467?fits=Model%3AStarlet%7CPlat_Gen%3AEP91&hash=item43d66c408b:g:W2kAAOxygPtSryiy Thanks

http://www.wheelpaints.co.uk/After-Market-Manufactures-Colour/ Hope this helps

I'm in Sth London and need item posted, so just the spoiler as full hatch would be high risk of damage. What type spoiler do you have?

Please do mate as it would be plug and play in mine

delete please

Want one of these for EP91, only std oem items please.

As above - wanted for my 5 door Sportif

Still looking.....

Thanks mate. Didn't know about that site.

Anyone got 1 that's just lying around the garage?

Is the Glanza front ARB better/stiffer than the n/a EP91 front ARB?

Need 1 as the frame on mine is cracked where the stay goes. Ohh must be in Sth London, Surrey, Kent area for easy collection.

Done mate

Only thermostatic oil plates are Mocal that I have seen.

Also piston engined light aircraft use AN10 oil lines to oil cooler. Its not the pipe size but the size of the oil cooler.

Really? Still available? Part number if available pls mate How much mate?

Want a JDM rear nearside light without reverse for EP91.

If you're making any more 50x15 TTE gel badges in black, I'll have 2 please. PM me the cost including post The wheel centres look good though

http://www.ebay.co.uk/itm/231559686133?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT Thermostatic sandwich plate with AN10 unions http://www.ebay.co.uk/itm/252250301114?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT AN10 10 row Oil Cooler http://www.ebay.co.uk/itm/AN-10-AN10-Straight-Red-Blue-Hose-Fitting-For-Fuel-Hose-And-Alloy-Fuel-Tank-/360594290989?hash=item53f518392d:g:TAoAAOSw8cNUPU11 AN10 hose ends http://www.ebay.co.uk/itm/AN4-4-AN6-6-AN8-8-AN10-10-Braided-Fuel-Oil-Hose-Off-Cuts-CHOOSE-YOUR-SIZE-/331601731017?var=&hash=item4d3500ddc9:m:mhwmMh-D0dd7CfLX4pIydgw AN10 Hose AN10 Relocation kit http://www.ebay.co.uk/itm/UK-2PCS-3-4X16-20X1-5-Oil-Filter-Relocation-Male-Sandwich-Fitting-Adapter-Kit-/231851295391?hash=item35fb6a029f:g:OIYAAOSwT~9Wl1AU Hope this helps. AN10 is sufficient as the bigger engines use this to good effect

Anybody tried this combination as it stays in the family? Discs are 4x100 and callipers should match.

Definitely do and are cheap

Thanks and good to know. Will source a Glanza rear bar for mine as it will put more weight on the steering wheels