Jump to content

jeffrosie

Member
  • Content Count

    344
  • Joined

  • Last visited

Everything posted by jeffrosie

  1. Once the skirts were fitted I also squeezed some PU18 through the fixing holes under the skirts and bonded them to the sills. Better than drilling the sills.
  2. No mate, not going to fit the cut off bits. Love the way it looks as it now.
  3. Here she is wearing her skirts. Bonnet needs paint as in primer, but car nearly there body wise.
  4. Didn't have the guts to drill the sills so just 1 screw hole on rear arch lip and bonded skirts to sills and front caps clipped on and screwed as using Glanza wings Rear Arch lip screw fixing Ready to pull some PU18 sealant
  5. Holes to be drilled and ACF50 to be sprayed into sills through all holes drilled. Sills then refitted with stainless screws and stainless penny washers. Lol thought you said 'making'. Going to hang the skirts with low tack masking tape and use a Sharpie to mark the holes mate
  6. I need mine doing too. Are the nuts mate? As I'll get stainless capped nuts.
  7. Same mate. Will definitely be fitted Saturday and pics will be up. Taking shape now with the bumpers, wings and bonnet. Tailgate with spoiler needs fitting too.
  8. Agreeing with the above. Top job. What did you make the front grill from mate?
  9. I will drill through the body and spray the inside if the sills through each hole with ACF50 - brilliant stuff . Going to use stainless self tapping bolts with stainless penny washers. Then run a thin edge of PU18 along the top edge to seal the top to the body. Stops too much rain running down into the skirts.
  10. I'll get the pics when I fit the sideskirts - hopefully this weekend.
  11. Skirts looking good. Cant wait to get them on the car
  12. Any body ever done this? A bigger piston will make the lazier 5E more rev happy.
  13. Steering column surround? or plastics that go around the back of steering wheel? 3 or 4 spoke?
  14. That's kl westie & Rory, let me know mate
  15. Lol yeah true. Ringlands , the curse of all 3SGTE's Mines fully forged and built with tightest tolerance by myself
  16. Wanted nearside Electric Headlamp Adjust Motor and part that attaches to headlamp/chassis for EP91. Car is UK, not import if that matters.
  17. Hi Skiny, what's wrong with your GT4? Mine needs the BC's fitted and exhaust rehung as I may have twisted since originally fitted?? not sure! The 5Door is coming well. Will soon cut the paint after front bonnet is painted. Side skirts going on this week after paint. And rear hatch needs fitting too with spoiler and number plate surround. Then have to transfer electric mirror looms. Has anybody fitted aircon? Love to transfer the aircon from the S.
  18. Side shot Front wheel just inside arch Rear wheel in line with arch
  19. 13mm front and 25mm rear hubcentric spacers fitted. Had to roll rear arches. Also going to mod my std panard rod to be adjustable ;)
  20. Been modding the sideskirts. 1 done and really happy with the outcome. 2nd one nearly there. Should be on the car by next weekend.
  21. Item For Sale: Glanza S Rear Hatch Item Condition & Description: Good overall condition, but be best to have a re-spray in your colour as the colour match is not perfect. Best thing about this hatch is that it does not have the factory hole cut out for the rear wiper. I have had a look inside the hatch and its factory solid no hole. It comes with rear plate surround with reverse lights, std Glanza rear spoiler with brake light & Duck Tail spoiler, although the duck tail has a little damage which can be easily fixed. The little chip can be seen on left of the duck tail. 1st pic is of
×
×
  • Create New...