Jump to content

Charlie28

Member
 View Profile  See their activity

  • Content Count

    902

  • Joined

  • Last visited

 Content Type 

Everything posted by Charlie28

  1. Charlie28
    clgallow
  2. Charlie28
    Turbo oil return pipe turned up yesterday! Thanks very much Sacha! I will be fitting sat and attempting to bring her to life! Updates to follow!
  3. Charlie28
    Bump!
  4. Charlie28
    Thanks Sacha
  5. Charlie28
    The sensor that screws into the thermostat housing and faces towards the bulkhead. Needs to be from a Glanza! Cheers, Charlie
  6. Charlie28
    Weather has been crap so haven't managed to get much done. Engine is all wired up and I'm just waiting on a turbo oil return pipe from Sacha @ WEPR to turn up before I start her up. Also gave her a little clean
  7. Charlie28
    Aircon is removed yes. Never had the problem when I had a glanza engine fitted. Only since I've fitted the GT engine and Slimline fan.
  8. Charlie28
    Posted this in the wrong section
  9. Charlie28
    Right, so I've fitted a forged GT engine in my glanza and swapped over the 3 pin sensor. I wired in my radiator fan from ID Workz. Now when i turn on the ignition the fan runs constantly. I've found out by removing a connection on the back on the thermostat housing stops the fan from running. Does this mean that the sensor is faulty? Cheers, Charlie
  10. Charlie28
    So you don't set the correct pressure before starting the car? You done it once the cars running? Is that not dangerous starting a car and it getting the incorrect amount of fuel?
  11. Charlie28
    Probably being very dumb here but how do you set the correct pressure? I know you need to unscrew the nut on the top but do you do this once the car is running? Can you set the correct pressure before you start the car? Cheers, Charlie
  12. Charlie28
    Perfect mate! Thank you
  13. Charlie28
    Would you post?
  14. Charlie28
    Thanks for the help guys! What I forgot to mention is this is a GT engine in my glanza. I believe it's a temp sensor for the A/C but on a glanza this is built into the main thermostat sensor making it a 3 prong connection. I've bought a sensor now just to plug the hole
  15. Charlie28
    Scrap that. Found out it's for the A/C and isn't required.
  16. Charlie28
    Anyone got the pipe that goes to the throttle body for sale?
  17. Charlie28
    Don't suppose you have any better pics of the pipe that goes to the throttle body?
  18. Charlie28
    It's on the back of the inlet bud. Cheers for the help on the others
  19. Charlie28
    Can anyone just help me out with a few little bits please! Firstly, what plugs into the head here? And does anyone have it spare? Secondly, what plugs onto this and where does it go? And lastly, I have an older spec engine in my 98 glanza and I don't seem to have a connection on the loom to connect to this? What is it and is it required?
  20. Charlie28
    Stunning manifold that! Wish i went with the S/S now! Gonna look the shit with the bay and engine all freshly painted!
  21. Charlie28
    They may seem too tight, but this is because the threads are full of crap! Its a pretty painful process, but get some WD40 and spray the bolt, and slowly screw it in and out of hole to remove the crap that's built up over the years! Once the thread is clean you'll be able to screw it in easily!
  22. Charlie28
    Finish wiring, Start her up, Take her for mapping!
  23. Charlie28
    Very tidy!
  24. Charlie28
    Looking good mate!
  25. Charlie28
×
×
  • Create New...