jamesglanza

Location: Sunny Isle of wight You taking the piss johnny its been raining all week!

The hand brake levers are shot on both of my calipers so if any one has a spare pair off a glanza that are in good working order and the hand brake levers are good then pm me. Not if your hand brake used to get stuck on or not work properly, obviously. Cheers.

Bump

bump

Hks sld Item Condition: working order. Price and price conditions: Prov sold Extra Info: cuts the 112mph speed limit on ecu Pictures: Contact Details: Pm Location: Isle of wight. Posted royal mail 51mm id five ply silicone 90 Item Condition: Brand new, Cost over £15 last year. Price and price conditions: £5 Extra Info: Each leg 70mm Pictures: Contact Details: Pm Location: Isle of Wight, Posted royal mail.

I think Idrees said its a 5E.

I had the same problem with the alternator pulley but made a 0.8mm spacer/washer and re-attached the pulley and spins freely now but with out this the pulley would grip on the alternator and not turn. Have yet to fix the crank pulley but have gauged up the cj's pulley to the original pulley and they look pretty much the same so hopefully all goes well.

I got my antirollbar polybushes from http://www.ebay.co.uk/itm/200676641289?ssP...984.m1423.l2649 If you want the standerd 20mm size or they do other sizes. If you want polybush drop links http://www.camskill.co.uk/m19b0s1310p51902...82_and_ALL_EP91 Or just the polybushes http://www.camskill.co.uk/m19b0s1310p58379...82_and_ALL_EP91

Thanks mate have done a few cylinder heads in the past, but advice is always handy.

Thanks mate have done a few cylinder heads in the past, but advice is always handy.

Its time to do my valve stem seam seals, are they just push on type seals or do you need a tool? Also is there any good valve stem seals on the market other than going toyota and this is a bit of a silly question but are ep82, ep91 seals the same, just thought i would ask lol. Any little tips or hints for fitting these or are they the same job as on any other cylinder head? Any help is greatly appreciated. Thanks.

Can any one back this up before i go cutting wires! Thanks.

Top man, will give this a go. Thanks.

Hi need help with fitting an hks speed limit defencer. I have a SLD and on the back it has the code (SLN1-00241) will this fit an EP91 glanza and has any one got a wiring diagram! I no where the red power and black earth wires go but i need help in locating the speed sensor wire on the ep91 ecu and which way round the yellow and white wires go to the direction of the speed sensor and ecu? if this makes sence. Any help is greatly appreciated, Thanks, James.

Hi need help with fitting an hks speed limit defencer. I have a SLD and on the back it has the code (SLN1-00241) will this fit an EP91 glanza and has any one got a wiring diagram! I no where the red power and black earth wires go but i need help in locating the speed sensor wire on the ep91 ecu and which way round the yellow and white wires go to the direction of the speed sensor and ecu? if this makes sence. Any help is greatly appreciated, Thanks, James.

www.tyre-shopper.co.uk price's include fitting at a center of your choice, Thats where i get my tyres it works out cheaper than fitting center price's.

Have you sorted this yet? Is your car lowered? Have you got adjustable top mounts? Have you got an adjustable panhard rod? My car did somthing along those line's when i lowered it and then got the tracking done. After sorting the camber on the front wheels and instaling an ajustable panhard rod and playing about getting the arse end straightened up i toke it back got the tracking done and it was ok. OR the people who did your tracking set the toe in/out wrong! as there are many differant variations of your vehicle with differant measurements for setting up your tracking. As i found this out t

Thats what made it more atractive to me as i dont really like the idea of drilling a hole in the chassis or having to weld the two piece's of right angled steel to the chassis. Has the ultra racing one got polyurethane or rubber bushes? Hurry up and fit it then tell me what its like lol. Cheers.

Cheers guy's what do people think then? Better design? Stronger? Easyer to fit? Do i go with one of these or do i stick with the tryed and tested whiteline kit? Cheers.

Any body had a look at these ultra racing rear arb's yet. Im still torn between the two what do people think?

Cheers guys, any comments to make about the rear arb from ultra racing? have you seen it fitted in the picture on ebay, what do you think? Im tempted to get the ultra racing one or should i stick to the whiteline kit? Cheers.

Cheers buddy, think im gona get the superflex ones from larkspeed as the postage works out cheaper. Are the old one's hard to get out?? Cheers

Has any body seen or got fitted to there car the ultra racing rear anti roll bar kit? They look a bit different from the whiteline kit, in the way they bolt to the car and so i guess they would work slightly different to the whiteline kit. Item number- 220864650968 on ebay. Im asking because i want to buy a rear arb but now i dont no which one to buy! The ultra racing one looks alot easier to fit! any help is greatly appreciated.

I want to change the anti roll bar bushes on my ep91 glanza because there the last one's left made of shitty rubber, but how hard a job is it to keep the standard anti roll bar and just change the bushes to poly bushes? Also does anybody no the exact size of the standard anti roll bar? 18mm 19mm 0r 20mm? i have heard different things from different people so i thought i would check with you guys. Any help is greatly appreciated cheers.

Cheers bud, i thought as much but needed some confirmation.