jamesglanza

As title says both radiator fans keep cutting in and out even when the engine is cold and not up temperature. The fuse box is clicking so have changed around the fuses/relays...no change! When i unplug the single wire sensor from the thermostat housing (near the bottom rad hoses) it cuts out the fan, so im guessing its the sender for the fan? So the twin wire sensor next to the top radiator hose is for? Any body got a spare sensor or advise? cheers.

That glanza shelf is mint, I want! But live on the I.O.W post? PM

Pm'd

Pm'd

Speak to James at c j performance, I bought a set at a good price.

Think it went with the bumper bud but will check tomorrow

Johnney is out of the country atm people Theres a few parts that i know of thats left inc- doors, wing, headlight, all interior plastics and a bare shell with a few things left on like hoses, fuel tank etc loads of bits that i cant think of to hand. If any one needs anything drop me a Pm as most parts are in my lock up, i will try to help best i can paypal accepted and can post almost anything as all parts are on the isle of wight. Thanks James.

As title wanted fuse box cover as the plastic clip has broken and will not hold shut, so must have plastic clips in place and not be cracked or split in any way. Also ep91 indicator units must have no cracks or splits, don't need lenses. cash waiting Pm

All sold please close

^

Pm'd

Manifold sold! Bump on the intercooler.

^

Was on the car when I bought it and had oem hoses on it but sealed fine never had a boost leak up to a bar was fine never ran any more with it. my guess is that the end of the inlet pipe is cut down as it would make the 90 bend to sharp if it had been any longer and the hose wouldn't fit properly. It would bend/crimp the hose by looking at it. Its never affected the performance or looks in anyway so has never bothered me but i could take it to work and flare it out a little if any one was that bothered about it. cheers James.

Thanks Ryan Legend! I left a woman to finish doing the pics while i went out. Wont be making that mistake again lol mech5107 there not perfectly round anyway, there not ment to be. My mates cooler was exactly the same and had the same shape inlet, Try looking up a few images of them and you should see the same shape. cheers James.

For Sale: Mazda rx7 top mount intercooler kit. Item Condition & Description: Very good working order, could do with a clean and polish up. Comes with mounting bracket and new silicone hoses inc clips. Great upgrade over stock, will fit standard oem hoses. Price: £60 Pictures: Payment & Shipping Details: Pm for postage price. Item For Sale: Ported oem manifold Item Condition & Description: Good condition, the restrictions/runners have been removed and manifold ported to increase exhaust gas flow and help turbo spool. A few cracks in the collector but th

Glanza s style, closed scoop either fiberglass/grp or plastic. Any one want to sell or know of where i can get one? Cheers.

< This is what they look like fitted

Pm'd

bump anyone

Just need the units, no lenses needed pm thanks.

Front gear box mount and engine mount needed, can be standard or TRD must have good rubber bushes no splits or tears. Also needed the 3 pin plug that connects to the throttle sensor with aprox 3 inches of wire attached. Pm cheers.

As title says 5.1 not 5.0 I stay away from silicone based brake fluid. Only asked for input as i have used 5.1 on a majority of cars in the past but i always like to here peoples thoughts before i go ahead with somthing. 5.1 all in now roll on summer Cheers.

Cheers for your contribution lads, only asking because im in the middle of a complete brake overhaul and noticed a nice new bottle of valvoline 5.1 in the the corner of the garage so didnt know whether to stick with dot 4 or flush out and start again with 5.1? If its only a higher boiling point and there are no gains then i may not bother. Cheers, James.

Any body using 5.1 instead of dot 4? Thoughts and feedback please. Thanks.