jamesglanza

Seat rail to fit fishnet recaro ep91. C pillar bar. What you got?

Nice one cheers bud.

I know that the hks fcd is wired up like this- ....Red............Black..........Yellow..........White ...Power....Ground/earth.....ecu.....Pressure sensor So is the jam fcd wired up like this? ....Red............Black...........Green..........White ...Power....Ground/earth.....ecu.....Pressure sensor

I know that the hks fcd is wired up like this- ....Red............Black..........Yellow..........White ...Power....Ground/earth.....ecu.....Pressure sensor So is the jam fcd wired up like this? ....Red............Black...........Green..........White ...Power....Ground/earth.....ecu.....Pressure sensor Thanks in advance.

Right i've finished reading all the accusations and bullshit now and decided that a site should be all about the people and there passion for cars, surely thats what we all signed up for in the first place! Im in.

how many kg? Thanks.

Any one?

After a c-pillar bar as my glanza now has an un-tinted back window! Prices please?

Fitted. Damm there tight, they aint never falling out! Im not sure if this was the right way but this is how i fitted mine. Dropped the cables underneath the car and proceeded to the garage to find two suitably sized (thick) washers, one the same size as the bush and with the hole big enough for the ball to sit freely and another the same size as the end of the cable where the bush sits but with the hole big enough for the bush to pass through (if that makes sence) Then popped the old rubber bushes out with a small screwdriver and smoothed the insides of where the bushes where housed with som

received today also, Thanks.

I used this boss http://www.ebay.co.uk/itm/STEERING-WHEEL-HUB-BOSS-KIT-Toyota-STARLET-inc-GLanza-/360428659497?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53eb38e329 Plugged in the wires and no light came on the dash so happy days. Dont forget to disconnect the battery lol Think it has to be (Part No. T-16) as this is the one for air bags and has the resistor to plug the wires into so the light on the dash stays off.

As said above are you breaking the whole car? could be interested in f/b bumpers.

Pm me your price bud wouldnt want to affend you with an offer lol

No not instantly bud as the car is not my daily drive, is it the gt spec with the 55mm inlet or the tongs with just the larger waste gate? very interested so pm me when your ready and give me first dibbs before you sell it. Why you Taking it off, you going td04? Have you had it from new? You have a misses that gets pissed off with waiting! I dont belive that lol Johnny why are you not on an mx5 forum Its getting closer to you going so will have to pop over and pick it up soon i suppose.

Looking for a ct9 hybrid, Tongs, Toytuning etc no speedvision no excessive shaft play must have good oil seals. What you got? Cheers.

Bump, any one?

Pics would be a good help thanks. Wanted some tighter fitting spacers than the cheap halfords ones bud as have used them in the past and they are softer than chocolate. Thanks.

As above, Pm me your price. Cheers.

Does any body know where to get tight fitting spacers from? 4x100 hub hole diameter around 56mm and 3mm thick? its only so i can finally fit the center caps on my rota grids. If any body else has had this problem will 3mm spacers be enough? Cheers.

I cant read japanese! lol Think its on 10 atm but just wasent sure whats best.

Just getting my mates car set up before it goes to the tuners and wanted to no what to set the FCD at when running around 0.9bar boost and 2.8bar fuel? Cheers.

Just wanted to no if the 4efe and 4efte dizzy cap was the same or not? As can get a 4efe cap for half the price of an 4efte! Cheers.

Payment sent.

Have i got to wait that long to make you silly offers on stuff? I will stop clogging up your sales thread now. Good price on the injectors!

lol when you leaving so i can come and rob the rest of the bits you got?